Rehau PVC edgebanding 302597-182 is a Rehau, Inc. edge banding product in the edgebanding category, so it finishes exposed panel edges with a consistent Rehau profile that matches other Rehau banded components on the same job. The SAP description lists a 1-5/16 x 3mm size, giving a specific width and thickness that suits applications calling for that dimension rather than a generic strip. The material is identified as PVC edgebanding, which provides a uniform synthetic edge surface where a PVC edge is required in the build. The description also notes FLEX CP21001, indicating a flexible formulation within that CP21001 reference that helps the banding follow standard panel lines. The same description specifies 300FT, giving a single continuous length that supports longer runs and repeated cabinet or panel work from the same roll.
The SAP description lists the edgebanding as 1-5/16 x 3mm, giving a precise width and thickness that lets installers choose it where a 1-5/16 inch, 3mm edge is part of the panel design. As an edge banding product from Rehau, Inc., it is intended for use wherever Rehau PVC edgebanding is specified in cabinetry or panel work. The 300FT length in the description defines how much material is available in one roll, which matters when planning runs across multiple edges or matching components. The FLEX CP21001 detail identifies this as a flexible PVC edgebanding within that reference, guiding selection when this particular Rehau formulation is required on a job.
This product is classified as edge banding in the Miscellaneous|Edgebanding category, so it serves as the finishing edge on qualifying boards or panels in woodworking projects that call for PVC edgebanding. The Brand field identifies Rehau, Inc., which places it within the Rehau PVC edgebanding system used throughout many cabinet and panel builds. The 1-5/16 inch width from the SAP description makes it suitable where panels are designed around that edge dimension rather than a narrower or wider band. The 3mm thickness defines its profile at the edge, which is important when coordinating with door clearances, shelf positions, or other components that are set up around a 3mm build.
The SAP description for this Rehau PVC edgebanding gives the FLEX CP21001 reference, signaling a specific flexible PVC formulation that helps deliver predictable handling behavior wherever that Rehau reference is used. The EMB LAC notation in the same description indicates an embossed lacquer surface, contributing a defined textured and lacquered appearance that stays consistent from one piece to the next across a project. The 300FT length means the same material reference can run across many edges before a roll change, which supports visual continuity along cabinet runs or banked panels. The manufacturer part number 302597-182 uniquely identifies this exact Rehau PVC edgebanding configuration, which helps shops repeat the same material on reorders and keep edge appearance aligned from job to job.
Rehau PVC edgebanding 302597-182 is described as 1-5/16 x 3mm, so it provides a 1-5/16 inch wide, 3mm thick edge profile where that exact size is required on panels.
The SAP description lists 300FT, giving a 300-foot length that supports multiple edges or cabinet components using the same continuous Rehau PVC edgebanding reference.
This product is identified as Rehau PVC edgebanding, so it provides a PVC-based edge solution where PVC banding is specified for panels or cabinetry.
FLEX CP21001 in the SAP description indicates a flexible PVC edgebanding within that CP21001 reference, guiding selection when that specific Rehau formulation is needed.
The EMB LAC notation in the SAP description identifies an embossed lacquer finish, so the PVC edge provides a defined textured and lacquered surface appearance.
The manufacturer part number 302597-182 uniquely identifies this specific Rehau PVC edgebanding, helping shops match the same size and finish on repeat or coordinated work.
The 1-5/16 x 3mm dimensions, FLEX CP21001 reference, and EMB LAC finish in the SAP description define a specific Rehau PVC edgebanding, so projects needing that exact size and surface can align edges to the same 302597-182 configuration. The 300FT length supports running this material across multiple pieces on a single job or across repeated work using the same Rehau reference.
Sold In: 1 Roll