Rehau PVC edgebanding 302597-183 is a PVC edge banding that covers exposed panel edges so cut boards present a finished, uniform look. The 1-5/16 inch width spans common panel thicknesses, giving consistent coverage from face to face along cabinet or casework edges. The 3mm thickness adds a solid edge profile that stands visibly proud of thin laminates, helping panels read as substantial while staying workable during machining. Its flexible construction, identified as FLEX, lets the strip follow straight runs and gentle curves without cracking, so long edges and mild contours can be handled with the same material. The CP41447 embossed lacquered surface builds in a textured, coated face that visually matches embossed finishes while providing a defined edge line along doors, shelves, and carcass parts. Supplied under Rehau, Inc. and part number 302597-183, the edgeband maintains traceable identification on shop paperwork and reorders.
This Rehau PVC edge banding in 1-5/16 x 3mm format offers a balance between coverage and manageable trimming, so operators can align the strip to the panel and then flush back minimal excess. The defined 3mm thickness gives enough material for clean edge routing while holding its shape along door and cabinet components. FLEX construction keeps the band following the panel line instead of fighting it, which helps maintain adhesive contact and alignment during feed. The 300ft continuous length supports feeding through automatic edgebanders or manual setups without frequent roll changes, keeping runs consistent from the first piece to the last.
As an edge banding product in the edgebanding category, this Rehau PVC edgebanding 302597-183 fits projects using sheet goods that require a finished perimeter. The 1-5/16 inch width works well on common cabinet and furniture panels, giving full edge coverage when applied along vertical gables, shelves, tops, and bottoms. The 3mm thickness suits applications where a more substantial edge is desired, such as doors, drawer fronts, and high-touch edges that benefit from a defined profile. The CP41447 embossed lacquered surface supports use alongside embossed decorative faces, helping panels maintain consistent texture from face to edge. Its flexible PVC construction allows this strip to handle straight cabinet runs and mild curves found in many woodworking layouts, so a single part number can serve multiple component types across a project.
The defined 1-5/16 x 3mm sizing lets shops set up trimming and routing around a known edge dimension, which streamlines machine settings and helps repeat results on different batches. FLEX construction aids feed through edgebanders by allowing the strip to seat tightly along the substrate, supporting uniform adhesive contact and reducing edge lift risks during normal handling. The 3mm thickness carries enough body to accept flushing and light profiling passes, which supports clean transitions at outside corners and along long edges. The CP41447 embossed lacquered finish presents a ready-to-use surface along the edge, eliminating separate finishing on that perimeter and simplifying workflow when matching embossed laminates or decorative surfaces. With a 300ft roll length tied to Rehau part number 302597-183, shops can stage material for extended runs while keeping part tracking straightforward across estimating, cutting, and edgebanding stages.
Rehau PVC edgebanding 302597-183 has a size of 1-5/16 x 3mm, giving full edge coverage and a substantial thickness for clean trimming and profiling on cabinet and furniture panels.
The FLEX designation on this PVC edgebanding indicates a flexible construction, which allows the strip to follow straight runs and gentle curves, supporting smoother application along varied panel edges.
The CP41447 embossed lacquered finish provides a textured, coated surface on the edge, helping visually align with embossed faces and offering a ready-to-use appearance without separate edge finishing.
The 3mm thickness of this PVC edge banding supplies enough material for solid edge profiles, allowing reliable flushing and light profiling while supporting a more substantial look on doors and panels.
The 300ft length of this Rehau edgeband supports extended edgebanding runs, reducing roll changes during production and helping maintain consistent results across multiple cabinet or furniture components.
Part number 302597-183 uniquely identifies this Rehau PVC edgebanding, supporting accurate estimating, job documentation, and straightforward reordering when matching existing installations or finishes.
This Rehau PVC edgebanding 302597-183 combines 1-5/16 x 3mm dimensions, FLEX construction, and a CP41447 embossed lacquered surface to support clean, repeatable edge results. For projects needing a substantial PVC edge that works across straight runs and gentle curves, this specific part number gives shops a consistent, traceable choice for finishing exposed panel edges.
Sold In: 1 Roll