Rehau PVC edgebanding described as 1-5/16X3MM FLEX CP41122 EMB LAC 300FT gives you a defined 1-5/16 inch wide, 3mm thick edge strip, so you can cover common panel thicknesses with a consistent, substantial edge profile. The material is PVC, so it provides a uniform synthetic edging solution where a plastic banding is specified for cabinets, fixtures, or similar projects. The roll length of 300FT supports longer runs and repeat jobs without frequent changeover, which helps keep edgebanding workflow steady on production equipment. The description notes FLEX, indicating a flexible construction that works with standard edgebanding processes where a bendable strip is expected. The CP41122 reference in the description identifies a specific Rehau design or program, which matters when matching this edgebanding to existing runs identified by that code. The EMB LAC wording points to an embossed, lacquered style, giving a textured, finished appearance that aligns with Rehau, Inc. programs using that description.
The stated 1-5/16X3MM format defines both the width and thickness of this Rehau, Inc. PVC edgebanding, so installers can set machine guides and pressure rollers for 3mm material and plan trimming for a 1-5/16 inch band. The identification of the product as edge banding confirms it is intended for use on exposed panel edges in woodworking or cabinet applications, fitting workflows that rely on continuous PVC strip material. The 300FT roll length listed in the SAP description suits production-style installation, allowing edgebanders to run multiple components from a single coil without frequent interruption, which supports consistent heating and feed settings across a job.
The product class noted as edge banding and the description 1-5/16X3MM FLEX CP41122 EMB LAC 300FT frame this Rehau PVC strip as a solution for finishing panel edges in woodworking and cabinet-related work. The PVC material serves as a synthetic edge treatment on substrates where a matching or coordinated band is needed rather than exposing raw panel core. The 1-5/16 inch width gives coverage for edges sized to that band, so fabricators can select this part when drawings or standards call out that width. The 3mm thickness supports applications where a thicker band is desired, such as doors, drawer fronts, or workpieces that benefit from a more substantial edge profile. The 300FT length allows this same specification to be applied consistently across a series of cabinets or architectural components identified under the same project or program. The CP41122 and EMB LAC references help align this banding with other Rehau elements that use those identifiers in project documentation.
The precise 1-5/16X3MM sizing in the SAP description gives installers a clear basis for setting feed pressure, trimmers, and flush cutters around a known 3mm PVC band, which supports repeatable, even edges across multiple parts. The FLEX note in the description indicates a flexible construction, which helps the band track through edgebanding equipment along straight runs and standard contours used in typical cabinet components. The embossed lacquered indication (EMB LAC) points to a textured and coated surface, which provides a defined finished look at the edge once machining and trimming are complete. Identifying the material as PVC clarifies that it behaves as a plastic strip in heating and trimming operations, which aligns with common edgebander parameters for PVC programs. The manufacturer part number 302597-185 ties these details to a single Rehau, Inc. identifier, helping shops call out the same banding each time they repeat a design that uses this specific edge treatment.
Rehau PVC edgebanding 302597-185 is described as 1-5/16X3MM, meaning it provides a 1-5/16 inch wide, 3mm thick band, which helps match equipment setup to that specific edge profile.
This Rehau edge banding is listed as 300FT, giving a 300-foot roll length that supports longer production runs before a roll change is needed on edgebanding equipment.
The 302597-185 edge banding is identified as PVC, so it behaves as a plastic strip during edgebanding operations, aligning with standard PVC edgebander settings and trimming practices.
The 3mm thickness provides a more substantial edge profile than very thin bands, supporting applications where a thicker PVC edge is desired for visual presence and machining stability.
The FLEX term in the description indicates a flexible PVC strip, which is suited to typical edgebanding workflows where the material needs to feed smoothly through standard equipment.
CP41122 and EMB LAC in the description identify a specific Rehau style with an embossed, lacquered finish, helping match this banding to projects specified with those identifiers.
The Rehau, Inc. PVC edgebanding with manufacturer part number 302597-185 provides a 1-5/16 inch by 3mm flexible strip in a 300FT roll, giving shops a clearly defined PVC edge solution under a single Rehau identifier for repeatable cabinet and woodworking projects.
Sold In: 1 Roll