Rehau PVC edgebanding 302597-189 is a PVC edge banding designed to finish exposed panel edges so cut substrates present a clean, uniform edge in cabinets and casework. The SAP description 1-5/16X3MM FLEX CP10105 EMB LAC 300FT identifies this edgeband as approximately 1-5/16 inch wide and 3mm thick, which suits many thicker cabinet doors or workpieces where a substantial edge is required for impact protection. The FLEX reference indicates a flexible construction that follows normal cabinet contours so straight and gently curved runs stay tight to the board. The 300FT notation designates a 300 foot length that supports longer production runs or multiple projects from a single roll, reducing changeovers during edging work. As a Rehau, Inc. product in the Edge Banding class, it aligns with woodworking shop needs for consistent, trade-focused edging.
Rehau PVC edge banding with a 1-5/16 inch nominal width spans typical door and panel thicknesses in one operation, so installers can align the strip to the edge and rely on minimal overhang for trimming. The 3mm thickness gives enough material to work confidently with standard trimming and scraping tools, so minor alignment variation can be cleaned up without thinning the visible face excessively. The FLEX designation indicates a construction suited to typical straight and modestly curved cabinet edges, which keeps the material seated against the substrate when pressed during standard edgebanding workflows. A 300 foot roll length means longer continuous runs on edgebanders or hand-fed setups, supporting steady progress on series work such as kitchen or commercial casework projects.
This Rehau PVC edgebanding, identified by manufacturer part 302597-189, fits into woodworking environments where exposed panel edges require a finished PVC edge, such as cabinetry, casework, or shop-built fixtures. The 1-5/16 inch by 3mm sizing serves situations using thicker doors, gables, or shelving where a narrow band would not fully cover the substrate edge. In these applications, the flexible construction described as FLEX allows the band to conform to standard cabinet geometry so runs along vertical gables, horizontal shelves, and door edges remain seated during bonding. For shops serving repeat customers, the CP10105 EMB LAC description string acts as a stable identifier so future orders match the original edging reference for uniform results across new and existing pieces.
The 3mm thickness on this Rehau 302597-189 edgeband provides a measurable working margin during trimming and finishing, helping technicians achieve a flush, smooth transition from face to edge without cutting through the PVC layer. With approximately 1-5/16 inch of width, panels with greater thickness can be edged while still leaving a manageable overhang, which simplifies trimming passes and reduces time spent correcting chatter or gouges. The 300 foot roll length contributes to predictable workflow on edgebanders because long cabinet runs or multi-unit orders can draw from a single continuous coil, limiting visible seams from roll changes. As an Edge Banding product from Rehau, Inc., this material fits into established woodworking and cabinet production setups, supporting repeatable, trade-focused edging results when aligned with standard shop processes.
Rehau PVC edgebanding 302597-189 is identified as 1-5/16X3MM, giving a nominal 1-5/16 inch width and 3mm thickness, which suits edging thicker doors, gables, or shelving panels.
The FLEX reference in the SAP description indicates a flexible PVC construction, so the edgeband follows typical straight and gently curved cabinet edges during installation.
The 300 foot length allows longer runs and multiple cabinet units to be edged from one roll, supporting continuous production with fewer material changeovers.
The 3mm thickness offers enough PVC for flush trimming and light profiling, giving installers working margin while maintaining a substantial edge on doors and panels.
The 1-5/16 inch nominal width spans thicker substrates in a single pass, so fabricators can cover the edge and trim minimal overhang instead of managing multiple narrow strips.
The CP10105 EMB LAC code in the description identifies this specific visual and specification reference, helping shops reorder the same edgebanding for consistent future work.
Rehau PVC edgebanding 302597-189 from Wurth Baer Supply combines a 1-5/16 inch width, 3mm thickness, FLEX construction, and 300 foot roll length to support cabinet and casework edging. When a project calls for a substantial PVC edge on thicker panels, this Rehau Edge Banding product aligns with trade workflows and repeat ordering under manufacturer part 302597-189 and SAP description 1-5/16X3MM FLEX CP10105 EMB LAC 300FT.
Sold In: 1 Roll