Rehau PVC edgebanding 302597-191 is a PVC edge banding product from Rehau, Inc., supplied by Wurth Baer Supply for woodworking projects where a finished edge is required. The SAP description "1-5/16X3MM FLEX CP41570 EMB LAC 300FT" identifies this as a flexible PVC edgeband that is approximately 1-5/16 inches wide and 3mm thick, giving you a defined edge profile suitable for many panel thicknesses. The 300FT reference shows it is supplied in a long continuous length, so larger runs on cabinets or casework can be handled with fewer splices along the edge. Being classified under Edge Banding and Edgebanding, this product is designed specifically to cover exposed panel cores, supporting a consistent appearance along doors, drawer fronts, and carcass edges in woodworking applications.
The 1-5/16X3MM dimension in the product description defines both the working width and thickness of this Rehau PVC edge banding, giving you a clear idea of how it will sit on the panel edge before trimming. That width supports coverage on many common panel builds used in cabinetry and casework, with room for a trim cut to bring the edge perfectly flush. The 3mm thickness supports a defined front profile after trimming, which can be important when matching an existing 3mm edge detail throughout a project. The 300FT length described in the SAP field means a single roll can serve many cabinet parts in one run, which supports steady feeding through an edgebander on larger shop jobs.
This product is identified as Rehau PVC Edgebanding, 302597-191, in the Edge Banding category, positioning it for use on exposed panel edges in woodworking. The 1-5/16 inch width supports coverage of edge cores on cabinet sides, doors, and shelving where the face material transitions to the edge, so the substrate is concealed once trimmed. The 3mm thickness provides a more substantial edge detail often used in commercial and higher-end residential cabinetry, supporting a consistent visual line when applied across multiple components. Because the description calls it FLEX CP41570, this PVC edgeband is configured as a flexible strip, which supports feeding through standard edgebanding equipment where the band must track reliably along straight runs on panels.
The SAP description "1-5/16X3MM FLEX CP41570 EMB LAC 300FT" gives the installer clear dimensional and format information before cutting a single part, which is useful when matching existing work or planning a new job. Knowing the edgeband is approximately 1-5/16 inches wide allows setup of the edgebander and trimming tools so the band overhangs just enough for a clean final pass. The 3mm thickness helps maintain a uniform edge reveal across an entire run of doors or partitions, which supports visual consistency from piece to piece. The flexible PVC configuration referenced in the description means the strip is suited for typical edgebanding workflows where the material must unwind, feed, and press onto edges without fighting the machinery. The 300FT length helps shops plan longer continuous runs, since a single roll can service multiple cabinets in sequence and supports steady production without repeated roll changes.
Rehau 302597-191 is a PVC edgebanding product in the Edge Banding category, so it is intended to cover exposed panel edges on woodworking and cabinetry components.
This PVC edgebanding is identified as 1-5/16X3MM, giving it a nominal width of about 1-5/16 inches and a thickness of 3mm for a defined edge profile.
The SAP description specifies 300FT, indicating a 300-foot length that supports running multiple cabinet parts in sequence with fewer roll changes during production.
The FLEX CP41570 reference identifies this Rehau PVC edgebanding as a flexible configuration, which suits typical edgebanding equipment workflows on straight panel edges.
As an Edge Banding product, this PVC strip is used on exposed edges of cabinet sides, doors, shelves, and other panel components to cover the substrate.
The Rehau PVC Edgebanding 302597-191 is supplied by Wurth Baer Supply, a specialty wholesale distributor to the woodworking industry.
Rehau PVC edgebanding 302597-191 combines a 1-5/16X3MM size with a flexible PVC format and a 300FT length, giving shops clear dimensions and run capacity for cabinetry and panel work. Sourcing it from Wurth Baer Supply connects this specific Rehau edge banding with a distributor focused on the woodworking industry, so the product aligns with professional cabinet and casework workflows that rely on consistent edge coverage.
Sold In: 1 Roll