Rehau PVC edgebanding 302597-197 provides a defined edge using PVC material, so cabinet and furniture projects get a consistent finished perimeter that visually matches from piece to piece. The 1-5/16 inch width (as stated 1-5/16) covers typical panel thicknesses in one pass, which reduces trimming time around cabinet sides and shelving. The specified 3mm thickness adds a noticeable edge profile, which helps create a substantial feel on exposed fronts. The flex designation in the description signals a construction intended to bend around standard contours, which supports wrapping softer curves without switching products. The CP60474 reference identifies the color or design series, which helps match this roll with existing runs using the same code. The 300 foot length allows multiple cabinets or a full room run to be handled from a single roll, which supports longer uninterrupted edges.
The 1-5/16 inch width defined in the SAP description gives enough coverage to span panel faces and slight overhang, which supports clean trimming with standard edge tools. The 3mm thickness builds an edge that can be machined without feeling fragile under typical cabinet shop handling. The PVC material identified in the product name responds well to standard edge-banding workflows, which lets installers run this product through typical machinery set for similar PVC stock. The 300 foot roll length described under SAP supports long, continuous runs along cabinet rows, which reduces splice locations along exposed lines.
This product is identified as Rehau PVC edgebanding in the edgebanding product class, so it fits applications where raw panel edges in cabinetry or furniture need covering with PVC tape. The 1-5/16 inch width works well on standard casework panel thicknesses, which suits cabinet sides, partitions, and shelving built from common sheet goods. The 3mm thickness from the SAP description creates a robust edge on high-traffic fronts, which supports use on kitchen, bath, or commercial cabinet doors and drawer fronts. The CP60474 reference aligns this edgeband with a defined design series, which helps keep color and pattern consistent across cabinet runs using that same identification.
The combination of 1-5/16 inch width and 3mm thickness described in the SAP data provides predictable stock dimensions, which simplifies machine setup for trimmers, routers, and edge banders already dialed in for similar PVC material. The flex designation in the description signals behavior suited to bending around standard radiuses, which reduces risk of cracking when following modest curves or transitions in cabinet layouts. The defined manufacturer part number 302597-197 ties every roll to the same specification, which supports repeat ordering when a job or customer standardizes on this exact edge profile and appearance. The 300 foot length noted in the description allows longer production runs before roll changeover, which helps maintain uniform heat, feed, and trim settings across a sequence of parts.
Rehau PVC edgebanding 302597-197 is identified as 1-5/16 inches wide and 3mm thick, so it covers common panel edges while creating a substantial finished profile.
Rehau PVC edgebanding 302597-197 is listed at 300 feet in length, which suits multi-cabinet runs and larger projects from a single roll.
Rehau PVC edgebanding 302597-197 is described as flex, indicating a construction intended to bend around standard contours during edging work.
Rehau PVC edgebanding 302597-197 lists CP60474 in the description, identifying the specific design or color series for consistent visual matching.
Rehau PVC edgebanding 302597-197 is in the edge banding product class, so it is intended for covering exposed panel edges in cabinetry and similar work.
Rehau PVC edgebanding 302597-197 at 3mm thickness suits cabinet doors, drawer fronts, and panels where a pronounced edge profile is desired.
Rehau PVC edgebanding 302597-197 combines a 1-5/16 inch width, 3mm thickness, and flex PVC construction, so cabinet and woodworking projects gain a defined edge that follows typical layouts. With CP60474 design identification and a 300 foot length, this edgeband supports consistent color and long production runs. For work that relies on repeatable dimensions and a substantial PVC edge, this specific Rehau part number matches projects built around the same design series.
Sold In: 1 Roll