Rehau PVC edgebanding, 302597-201, is a PVC edge banding designed to finish exposed board edges in woodworking and cabinet projects. The SAP description 1-5/16X3MM FLEX CP60251 EMB LAC 300FT identifies a strip that covers edges with a consistent width and thickness, which helps create uniform lines along cabinet sides, shelves, or panels. The 1-5/16 inch width gives coverage for common board thicknesses while allowing a bit of trim margin during fabrication. The 3mm thickness provides a substantial edge profile, which supports a solid feel at the edge once bonded. The FLEX CP60251 detail designates a flexible PVC formulation, which helps the band follow gentle contours or slight irregularities in cut edges. The 300FT length supports multiple cabinets or a production run from a single roll, which helps reduce changeovers during edgebanding work.
The 1-5/16 inch width gives installers working room during application, so the band can be centered over the substrate edge and trimmed back to a clean line. The 3mm thickness offers a substantial edge that pairs well with routing or edge trimming tools, helping maintain a straight, clean profile after flush trimming. The flexible PVC noted by FLEX CP60251 allows the strip to press tightly against the panel edge under edgebander pressure or hand rollers, which supports consistent adhesion along the full length. The 300FT roll length reduces the number of material changes during an installation run, which helps maintain alignment and workflow when feeding an edgebander or working through a shop cut list.
This Rehau PVC edgebanding, 302597-201, in the edge banding product class, serves as a finishing edge for cabinet boxes, shelving, and panel components in woodworking shops. The 1-5/16 inch width suits many panel thicknesses common in cabinetry, giving room for precise trimming without exposing the core. The 3mm thickness provides a more pronounced edge profile, supporting projects where a thicker edge detail matches the design intent. The flexible PVC identified as FLEX CP60251 helps this banding adapt to various panel layouts, whether running along cabinet sides, top rails, or shelf fronts. The 300FT length in the SAP description supports small batch work and larger runs from the same material, which helps keep edge appearance uniform across a full room layout or bank of cabinets.
The defined 1-5/16 inch by 3mm dimensions give a predictable edge geometry, which supports repeatable setup on edgebanders and hand tools from job to job. The Rehau brand and manufacturer part number 302597-201 provide a fixed reference, which helps shops reorder the same edge profile when matching existing installations or extending a run. The flexible PVC noted by FLEX CP60251 works with typical edgebanding equipment that applies heat and pressure, supporting a stable process window for bonding. The 300FT length per roll supports consistent color and surface from piece to piece within the same job, which matters when doors, drawer fronts, and cabinet cases align in a single visual field. Being categorized as edge banding clarifies its role in the assembly, so it fits naturally into established shop workflows for edging cut panels before final assembly.
Rehau PVC edgebanding, 302597-201, is described as 1-5/16X3MM, providing a 1-5/16 inch wide band with 3mm thickness, which supports substantial edge coverage and a thicker finished edge profile.
The FLEX CP60251 detail indicates a flexible PVC construction, which helps the edgebanding conform closely to panel edges, supporting good contact along straight runs and gentle contours.
The 300FT designation in the SAP description identifies a roll length of 300 feet, which supports multiple cabinets or a production run from a single continuous length.
This product is classified in the edge banding product class and the Miscellaneous|Edgebanding category, which positions it as a dedicated material for finishing panel and cabinet edges.
The 302597-201 PVC edgebanding is manufactured by Rehau, Inc., providing a consistent reference for matching existing projects that use Rehau edge banding.
The 3mm thickness specified in 1-5/16X3MM FLEX CP60251 EMB LAC 300FT creates a thicker edge that supports a solid feel and helps resist minor edge wear in daily cabinet use.
This Rehau PVC edgebanding, 302597-201, combines a 1-5/16 inch width, 3mm thickness, and flexible PVC construction in a 300FT length, aligning well with cabinet and panel edge finishing. Adding this edge banding to your Wurth Baer Supply order supports consistent, repeatable edge results across current and future woodworking projects.
Sold In: 1 Roll