Rehau PVC edgebanding 302597-203 is a PVC edge banding designed to finish exposed panel edges on woodworking and cabinet projects, which gives raw board a defined edge line that looks complete and protects the substrate from direct contact. The 1-5/16 inch width covers standard panel thicknesses with room for trimming, so installers can align slightly proud of the surface and flush-trim back for a crisp, accurate edge. The 3mm thickness adds a substantial edge profile, which helps panels resist everyday knocks better than a thinner strip in busy shop and jobsite environments. The FLEX designation indicates a flexible PVC construction, which lets the banding follow straight runs and gentle curves without fighting the material during application. The CP41293 EMB LAC finish identification defines a specific decorative and surface look, so matching multiple panels across a project stays consistent from piece to piece. The 300ft length designation supports longer runs and repeat jobs.
The stated 1-5/16 inch width of this Rehau PVC edge banding gives installers enough material to cover the panel edge and a small margin over each face, which supports precise flush trimming without exposing the core. The 3mm thickness provides a robust edge strip, so trimmers and routers engage a stable profile rather than a thin film, helping keep passes controlled along the length. The FLEX PVC characteristic lets the banding follow the edge line with less spring-back, which supports even adhesion along straight and gently curved sections. The 300ft length reference means longer continuous runs can be handled from a single coil, reducing changeover time between cabinets or repeated case parts in shop workflows.
This Rehau PVC edgebanding 302597-203 is intended for covering exposed edges on engineered wood or similar panel-based components, so cabinet cases, shelving, and furniture parts gain a finished edge that visually ties into the chosen CP41293 EMB LAC surface design. The 1-5/16 inch width is suited to edging panel sides where a modest overhang is preferred for trimming, including cabinet sides, tops, bottoms, and vertical partitions in built-ins. The 3mm thickness gives doors, drawer fronts, and high-contact shelf edges a more substantial feel at the perimeter, which is useful in residential and commercial spaces where edges see frequent handling. The PVC FLEX construction supports use on straight carcass edges and gentle curves on custom pieces, so one material type can address multiple edge conditions within the same job.
The combination of 1-5/16 inch width and 3mm thickness on this edge banding creates a working band that is easy to grip, align, and trim, which helps keep installation consistent from part to part and reduces rework caused by misaligned strips. The 3mm profile offers more material at the edge line, giving trimming tools a predictable bearing surface that supports smooth, chatter-free passes along doors and panels. The FLEX PVC formulation reduces stiffness at the edge, which helps the strip lie flat against the substrate when pressed into adhesive, supporting an even bond line along long cabinet sides. The CP41293 EMB LAC designation ties the edgeband to a defined decorative style, so repeated orders of 302597-203 maintain the same look across replacement parts or expansions to existing installations, helping keep visual continuity over time. The 300ft length reference allows fabricators and installers to work multiple components from the same coil, which supports a more streamlined edging workflow in both shop and on-site environments.
Rehau PVC edgebanding 302597-203 at 1-5/16 x 3mm provides extra width for trimming and a thicker edge profile, helping create clean, flush edges and a solid feel along cabinet and panel perimeters.
The FLEX PVC design of this edge banding lets it follow straight and gently curved edges with less resistance, supporting flatter contact with the substrate and consistent adhesion along the full run.
The CP41293 EMB LAC designation identifies a specific decorative and surface style on this edgeband, helping installers match the edge appearance with corresponding panel designs across a project.
This 3mm Rehau PVC edge banding creates a more substantial edge, giving tools a stable profile for trimming and helping panel edges handle routine contact in cabinet and furniture use.
The 300ft length designation lets shops and installers edge multiple panels and cabinets from a single run, which supports consistent appearance and reduces changeovers during production work.
This Rehau PVC edgebanding 302597-203 is used on exposed edges of panel-based components such as cabinet cases, shelves, doors, and partitions, giving them a finished, coordinated CP41293 EMB LAC edge.
Rehau PVC edgebanding 302597-203 brings a 1-5/16 inch wide, 3mm thick FLEX PVC strip with a defined CP41293 EMB LAC finish, so cabinet and woodworking projects gain a consistent, finished edge. The 300ft length designation supports edging multiple panels and assemblies from the same material reference, helping maintain visual and dimensional uniformity across a run. For shops and installers wanting a PVC edge banding that pairs a specific decorative style with practical working dimensions, this Rehau option aligns edge coverage, profile, and flexibility in one product reference.
Sold In: 1 Roll