Rehau PVC edgebanding 302597-204 provides an edge banding solution that covers raw panel edges, giving casework and components a finished appearance that matches your layout. The product is identified as Rehau PVC Edgebanding, 302597-204, so installers can tie this roll directly to drawings, cutlists, or maintenance records that reference that number. The 1-5/16 inch width stated in the description gives coverage for common panel thicknesses where extra height is needed for trimming and flush routing, supporting tight-looking edges after processing. The 3mm thickness specified in the SAP description offers a robust edge profile that stands out visually on panel fronts and helps define the edge line in a consistent way. The 300ft length noted in the description provides extended run capacity from a single roll, which supports longer production runs or multiple cabinet jobs with fewer roll changes.
The SAP description identifies this Rehau, Inc. edge banding as 1-5/16 inch wide, which gives extra height beyond many standard panel thicknesses and leaves material for top and bottom trimming during installation. The 3mm thickness stated in the description produces a solid edge face that responds well to standard trimming, scraping, and flushing processes used in edge banding work. Because the product is described as flexible, it can conform to typical straight runs while being manageable to coil, feed, and guide through common PVC edgebanding equipment in a shop environment. The 300ft roll length listed in the description supports setting up a run once and processing many parts in sequence, which is useful when banding cabinet doors, drawer fronts, or case parts that share the same decor.
The SAP description for 302597-204 calls out a 1-5/16 inch width, which suits edge coverage on panels where the finished thickness is less than the band, leaving material to trim flush on both faces. That extra width supports accurate alignment on the edgebander because there is margin above and below the core panel, helping keep glue lines centered across varying panel tolerances. The specified 3mm thickness creates a pronounced edge that works well on doors, drawer fronts, or shelves where a thicker edge is part of the visual design. This thickness also provides a consistent surface for later edge scraping and light sanding, helping achieve smooth transitions from band to panel. Because the material is identified as PVC, it fits with machinery and glues that are already set up for PVC edge processing in many woodworking shops, simplifying day-to-day workflow when switching between jobs.
The SAP description lists CP41173 together with EMB and LAC, giving clear identifiers for the decor, texture, and surface style within Rehau, Inc. offerings. CP41173 points to the specific design reference, which helps match the edge to panels or laminates specified under the same or corresponding code in project documentation. The EMB notation indicates an embossed surface, providing a textured finish that aligns with many structured panel faces and can soften the appearance of minor handling lines along the edge. The LAC detail in the same description associates the band with a lacquer-related surface concept within this product group, defining how the edge appearance fits into a coordinated finish scheme. By combining these codes with the 1-5/16 x 3mm size and PVC material description, the product gives installers and fabricators a repeatable way to specify and reorder the exact edgebanding used on a given cabinet or furniture program.
Rehau PVC edgebanding 302597-204 is described as PVC, so it works as a thermoplastic edge suited to standard PVC edgebanding processes commonly used in cabinet and furniture shops.
Rehau PVC Edgebanding 302597-204 is identified in the SAP description as 1-5/16 inch wide and 3mm thick, giving a tall, substantial edge profile for trimming flush to panel faces.
The SAP description specifies a 300ft length, which supports longer edgebanding runs on cabinets or casework before any need to stop and change rolls.
The CP41173 EMB LAC notation identifies the decor code, embossed texture, and lacquer-related surface style within the Rehau line, helping align the edge with matching surfaces.
PVC edgebanding 302597-204 is identified with the brand Rehau, Inc., giving fabricators a known manufacturer reference for project specifications and reorders.
The 3mm thickness noted in the description creates a clearly defined edge profile that stands out on doors and panels while providing material for precise trimming and scraping.
Rehau PVC Edgebanding, 302597-204, combines a 1-5/16 inch width, 3mm thickness, and PVC construction to support edge finishing on doors, drawer fronts, and case parts. The CP41173 EMB LAC identification ties the roll to a specific decor and surface style for consistent visual results across a project. With a 300ft length described in the SAP details, this edgebanding supports extended production runs in woodworking shops working with repeated cabinet or furniture designs that call out this exact Rehau, Inc. part number.
Sold In: 1 Roll