Rehau PVC edgebanding, identified by manufacturer part 302597-205, provides a PVC edge banding solution that finishes exposed panel edges so cabinet and furniture projects present a consistent, professional surface across the run. The 1-5/16 inch width stated in the SAP description gives coverage for common panel thicknesses with enough margin for trimming, which supports tight visual lines after flush trimming operations. The 3mm thickness noted in the description creates a substantial edge profile that handles routing and finishing steps while maintaining a solid visual band along door and panel edges. The CP21117 embossed lacquer designation describes an embossed lacquer surface on the PVC material, giving the banding a textured, finished face that visually aligns with laminated or coated panels in the project. The 300ft length in the description provides an extended run for production or multi-piece jobs, so installers and shops can work through several components while staying on one continuous roll of the same finish.
The 1-5/16 inch width specified in the SAP description gives installers working room on either side of typical panel thicknesses, so trimming passes can be set to cut cleanly without chasing a narrow strip at the edge. The 3mm thickness in the description provides enough material for controlled flush trimming and minor profiling, helping maintain a straight, solid edge line across cabinet doors and panels after machining. The PVC material type referenced in the product information works with standard edge banding equipment, so shops can feed, cut, and trim this banding within existing workflows. The CP21117 embossed lacquer surface callout signals a finished, textured face that aligns visually with coordinated surfaces, simplifying selection when consistent appearance across panels and edges is required.
The product name Rehau PVC Edgebanding, 302597-205, identifies this item as a Rehau PVC band sized for edge finishing, so it slots directly into cabinet, furniture, and casework projects that require covered raw panel edges. The 1-5/16 inch width in the SAP description supports use on panels where a bit of overhang is preferred before trimming, which suits standard cabinet side panels, shelves, and larger fronts. The 3mm thickness specified for this edgebanding produces a noticeable yet controlled edge detail, giving fabricated pieces a defined border that reads consistently from part to part. The PVC construction mentioned in the product details pairs with common edgebanding machinery, allowing the same equipment used on other PVC bands to process this 302597-205 item without altering core workflow steps.
The CP21117 embossed lacquer notation in the SAP description defines a surface treatment on the banding, which helps the visible edge present a uniform, textured finish across every door and panel using this roll. Because the banding is described as 3mm thick, trimming and routing operations have stable material to work with, limiting edge variation from part to part when using consistent machine settings. The 1-5/16 inch width detail supports repeatable alignment on the panel edge before trimming, so operators can set guides and cutters once and process multiple pieces with the same setup. With a 300ft length documented in the description, a single roll can cover many components in succession, helping shops keep color and texture consistent across groups of cabinets, runs of shelving, or full-room layouts without switching between shorter lengths.
Rehau PVC edgebanding 302597-205 is described as 1-5/16 inch wide and 3mm thick, giving installers extra trim width and a substantial edge profile for clean, consistent finishing.
Rehau PVC edgebanding with CP21117 embossed lacquer has an embossed lacquered surface, so the visible edge presents a textured, finished face that coordinates with matching decorative surfaces.
Rehau PVC edgebanding 302597-205 is listed at 300ft per roll, providing enough material for extended runs so multiple parts share the same finish and texture.
Rehau 302597-205 is described as PVC edgebanding, giving shops a thermoplastic edge material that is compatible with standard PVC edgebanding processing equipment.
This 1-5/16 inch by 3mm Rehau PVC edgebanding fits cabinet, furniture, and casework applications where exposed panel edges need a finished PVC band with an embossed lacquer surface.
The 3mm thickness on Rehau PVC edgebanding 302597-205 provides enough material for flush trimming and light profiling, supporting straight, defined edges on doors and panels.
The manufacturer part 302597-205 defines this Rehau PVC edgebanding as a 1-5/16 inch wide, 3mm thick band with a CP21117 embossed lacquer surface, so each run delivers a finished, textured edge. The 300ft length documented in the SAP description supports longer jobs or repeated use across multiple projects while keeping color and surface treatment the same from piece to piece. For shops and installers needing PVC edge banding that aligns with these dimensions and finish characteristics, this Rehau roll offers a clearly specified option ready to fit into established PVC edgebanding workflows.
Sold In: 1 Roll