Rehau PVC edgebanding 302597-206 is a PVC edge banding in the Rehau line that covers and protects raw panel edges, so finished parts present a consistent look around the perimeter. The 1-5/16 inch width stated in the SAP description gives coverage for typical panel thicknesses in this size range, helping installers match the strip to their board layout. The 3mm thickness described in the SAP description provides a substantial edge profile, which matters when parts see frequent handling or impact around door and shelf fronts. The flexible designation in the SAP description indicates the material is designed to follow standard straight runs and gentle curves, which supports efficient banding on common woodworking projects. The CP20275 identifier in the SAP description defines a specific Rehau design reference, so repeat jobs can be specified and ordered by the same number.
The listed 1-5/16 inch width gives room to center the edgeband over the panel edge and trim flush on both faces, which supports a clean final line on cabinet and casework parts. The 3mm thickness noted in the SAP description creates a pronounced edge that can align visually with other 3mm-banded components in the same project. The flexible designation from the SAP description supports application along standard straight edges with normal feed paths, so workflows can be based on typical edgebander settings for PVC materials. The embossed lacquer face recorded in the SAP description sets a defined surface texture that can align with chosen board and front selections in coordinated jobs.
The product class is listed as edge banding, placing this Rehau PVC edgebanding 302597-206 in typical edge finishing roles on cabinet, furniture, and casework parts where a PVC strip is appropriate. The 1-5/16 inch width from the SAP description aligns with panels that fall around that edge coverage band, giving installers room to position and trim without exposing the substrate. The 3mm thickness stated in the SAP description suits applications that call for a thicker edge, such as fronts or shelves that see hand contact, allowing the band to present as a defined, substantial edge detail. The flexible notation in the SAP description means the edgeband is suited to standard straight runs on woodworking machinery that processes PVC strips, so it integrates into production lines that already handle similar edge materials.
The 1-5/16 inch by 3mm size defined in the SAP description sets both the coverage and the edge profile, so cutting patterns and trim settings can be planned around a consistent strip size. The FLEX designation in the SAP description characterizes the edgeband as flexible PVC, which matters when running continuous lengths on edgebanders that expect a material able to feed and wrap the edge without resisting the feed pressure. The CP20275 reference stays attached to this exact configuration, supporting repetitive ordering when a shop standardizes on that look and dimension set for a line of parts. The embossed lacquer surface noted as EMB LAC in the SAP description provides a textured, lacquered face, so the visible edge reads as a finished component alongside the chosen board surfaces during installation and everyday use.
Rehau PVC edgebanding 302597-206 is listed in the SAP description as 1-5/16 inch wide by 3mm thick, which defines the edge coverage and resulting profile on finished panel edges.
The FLEX designation in the SAP description signifies a flexible PVC edgeband, which supports continuous feeding on edgebanding equipment along straight edges in typical woodworking production.
The CP20275 EMB LAC notation in the SAP description identifies a specific Rehau design with an embossed lacquer surface, providing a defined textured finish on the visible edge.
The SAP description specifies a 300ft length, giving a continuous run that supports batch processing of multiple parts before changing to a new roll.
The product class identifies it as edge banding, positioning it for covering and finishing exposed panel edges in woodworking applications such as cabinets and casework.
The 3mm thickness noted in the SAP description produces a more substantial edge profile, which gives doors, fronts, and shelves a defined, robust-looking perimeter.
The SAP description defines this Rehau PVC edgebanding 302597-206 as a 1-5/16 inch by 3mm FLEX CP20275 EMB LAC 300ft product, so selection decisions can align with that exact size, surface, and length. The edge banding product class and PVC material reference position it for standard woodworking edge finishing tasks, allowing projects to run a consistent, embossed lacquer surface along exposed panel edges. For work that benefits from a flexible PVC strip, a 3mm profile, and a repeatable CP20275 design reference, this Rehau edgeband offers a clearly specified option for ongoing cabinet and furniture runs.
Sold In: 1 Roll