Rehau PVC edgebanding 303334-018 provides a PVC edge banding solution in a defined size for covering exposed panel edges on woodworking projects where this profile is specified. The 1-5/16 inch width gives coverage for panels sized around that dimension, helping installers finish edges on compatible substrates in one pass without trimming for narrow faces. The 3mm thickness creates a substantial edge profile, giving projects a solid visual line where this thickness is required by design or match specifications. The PVC material establishes a plastic-based edge, so installers can work with a consistent synthetic surface across the length. The designation FLEX CP30010 indicates a specific Rehau material formulation, keeping performance characteristics consistent when matching to existing runs that were built with the same code. The 300FT length described in the product data defines a continuous supply for extended runs, reducing interruptions during edge processing when this length is appropriate.
The 1-5/16 inch width on this Rehau PVC edge banding sets the base for how it aligns to compatible panel edges, so installers can position the banding knowing its span across the face and overhang. The 3mm thickness defines how far the edge will stand off the panel surface, which affects how it meets adjacent components where a 3mm edge has been planned. The PVC material establishes a uniform synthetic surface that supports typical edge processing where PVC is required in the specification. The FLEX CP30010 notation in the description provides a consistent material type, which matters when the same code is already used on previous work and needs to be matched by installers in the field or shop.
This Rehau PVC edgebanding, identified as 303334-018 and classified as Edge Banding, fits projects that call for a defined PVC edge treatment using this specific manufacturer part number. The 1-5/16 inch width suits edge coverage on panels designed around that dimension, allowing installers to plan for slight overhang where that is part of the process. The 3mm thickness aligns with build-outs that specify a 3mm edge, so fabricators can coordinate door, drawer, or panel clearances around that known edge size when they are using this product. The PVC construction supports projects where a plastic-based edge is part of the design intent or existing installation standard. The FLEX CP30010 designation helps match this item to drawings or cut sheets that reference that exact material callout, keeping jobs consistent when additional edgebanding is required under the same specification.
The manufacturer part number 303334-018 gives shops a precise identifier, which supports repeat ordering and reduces variation when matching prior work that already used this Rehau PVC edgebanding. The 1-5/16 inch width provides a stable planning dimension, helping installers set up their trimming and edge processing to work reliably with that span across multiple pieces. The 3mm thickness creates a predictable edge build that can be factored into layout and hardware positioning, which is important where a consistent 3mm edge is part of cabinet or fixture standards. The PVC material offers a consistent base for edge finishing operations that are designed around PVC, so workflows can remain the same whenever this specific product is used. The FLEX CP30010 description keeps the material type repeatable, which matters when fabricators want the same visual and handling characteristics across replacement panels or future phases of the same project.
The Rehau 303334-018 PVC edgebanding is described as 1-5/16 inches wide and 3mm thick, so installers can plan edge coverage and edge build around those defined dimensions during project layout.
The Rehau 303334-018 edgebanding is made from PVC, giving installers a plastic-based edge surface that aligns with workflows and equipment set up for processing PVC materials.
The Rehau PVC edgebanding 303334-018 is specified at 300FT in length, supporting extended edging runs or multiple smaller jobs under the same product reference.
The FLEX CP30010 notation identifies a specific Rehau PVC material formulation, helping shops match this edgebanding to drawings or previous work that call out the same code.
The 3mm thickness on this Rehau PVC edge banding creates a pronounced edge profile, which matters on projects that specify a 3mm build for visual consistency and hardware clearance planning.
Rehau 303334-018, with its defined width, thickness, PVC material, and FLEX CP30010 code, gives shops a stable specification to repeat across phases or replacement work.
The Rehau PVC edgebanding 303334-018 from Wurth Baer Supply combines a defined 1-5/16 inch width, 3mm thickness, and PVC construction under a single manufacturer part number. The FLEX CP30010 designation ties this size and material together, supporting repeatable selection whenever projects require the same edge specification. For jobs already referencing Rehau 303334-018 or that are built around a 3mm PVC edge at this width, using this product keeps ordering, layout, and matching straightforward across current work and future phases.
Sold In: 1 Roll