Rehau PVC edgebanding gives woodworking shops and installers a dedicated edge treatment for panels that call for a 1-5/16 inch wide band. The 3mm thickness provides a substantial edge layer that covers exposed substrate cleanly and helps create a solid edge profile in one pass. The flexible construction lets the band follow panel runs while staying manageable during straight-line application on standard edgebanders. With the Rehau, Inc. manufacturer name and the 303334-101 part number, shops can align this edgebanding with existing Rehau-based systems and job records. The SAP description also identifies the CP10031 LAC specification, which groups this material with matching runs and finish types in a shop database. The 300FT length supports longer production runs or multiple smaller projects without frequent material changeovers, helping keep edge-processing time consistent across a batch.
The stated 1-5/16 inch width positions this Rehau PVC edgebanding for panel edges that need full face coverage with room for light trimming, which supports cleaner alignment on edgebanders. The 3mm thickness provides a defined edge that seats firmly against the substrate during application, giving the equipment a consistent material thickness to work with across the roll. Because the SAP description identifies the material as PVC and flexible, installers can set edgebander parameters with a clear expectation of how this band will behave under standard feed and temperature settings. The 300FT roll length supports a single setup over many panels, allowing shops to align guides and cutters once for that width and thickness and then run a series of parts using the same configuration.
The Rehau 303334-101 designation identifies this product as a specific Rehau PVC edgebanding that sits in the Wurth Baer Supply edge banding category, placing it directly in panel and cabinet edge workflows. The 1-5/16 inch width aligns with panels that present a similar edge dimension, so shops can cover the edge and allow for precise trimming without leaving exposed substrate. With a 3mm thickness, this banding can be used where a more substantial edge is desired, such as cases, shelving, or panels that benefit from a thicker edge profile. The flexible note in the SAP description means the band is suited to typical straight cabinet and furniture components that pass through standard edgebanders, fitting into the same production line as other PVC edgebanding of comparable dimensions.
The combination of a defined 1-5/16 inch width and 3mm thickness lets operators dial in edgebander settings to a single known size, which supports repeatable trimming and scraping results from panel to panel. Because the product is identified as PVC with the CP10031 LAC specification, shops can group this banding with matching Rehau materials in planning software or job folders, keeping visual and dimensional consistency across a project. The 300FT length noted in the description reduces interruptions during production, allowing the same roll to cover a large number of edges before a roll change is required. Using the specific manufacturer part number 303334-101 helps purchasing and production teams call out the exact same edgebanding each time, which supports consistent panel appearance and handling characteristics across reorders and long-running programs.
Rehau 303334-101 edgebanding is identified in the SAP description as PVC, which places it in a common plastic edge material family used with standard woodworking edgebanders.
This Rehau PVC edgebanding has a stated width of 1-5/16 inch and a thickness of 3mm, giving installers a generous edge cover with a substantial edge profile.
The SAP description notes a 300FT length, supporting extended runs or multiple jobs from a single roll before a changeover is needed in production.
The flexible note in the description indicates this PVC banding is suited to typical straight or gently changing runs on standard edgebanders in woodworking environments.
The CP10031 LAC code in the SAP description ties this banding to a specific Rehau specification, helping align it with matching material references in shop records.
The 3mm thickness builds a noticeable edge that supports light machining and finishing while keeping the panel core covered along the entire edge.
This Rehau, Inc. PVC edgebanding from Wurth Baer Supply combines a 1-5/16 inch width, 3mm thickness, and 300FT length under the defined 303334-101 and CP10031 LAC identifiers. Those specifics give woodworking shops a repeatable edge material for panel runs that require a substantial PVC edge. Adding this exact part number to purchasing and production workflows helps keep panel edges consistent across jobs.
Sold In: 1 Roll