Rehau PVC edgebanding 303334-105 is a PVC edge banding product from Rehau, Inc. that covers raw board edges so the edge matches the finished surface and holds up during normal shop handling. The 1-5/16 inch width gives coverage across typical panel thicknesses while allowing a small trim margin, which helps achieve a straight, flush edge after trimming. The 3mm thickness creates a more substantial edge profile than thin tape-style edges, which supports a sturdier feel at cabinet and furniture fronts. This edgebanding is described as FLEX, so it is designed to follow normal cabinet edge runs, supporting consistent application around standard straight edges on woodworking projects. The CP50003 LAC designation identifies the specific finish family and surface look, which keeps visual results consistent across multiple panels on the same job. The 300FT length supports longer production runs or multiple pieces without frequent changeover.
This Rehau PVC edge banding uses a 1-5/16 inch width, giving installers enough coverage to center the band on the substrate and still trim both sides back to the panel face. The 3mm thickness offers a substantial edge profile that works well with typical trimming tools and flush-routing operations, supporting a precise finished line along doors and cabinet parts. Described as FLEX, this PVC edgebanding is suited to standard straight-edge runs used in cabinetry and furniture construction. Supplied in a 300FT length, the roll format supports extended application on edgebanding equipment or repeated manual runs without frequent material change.
This Rehau PVC edgebanding, classified as Edge Banding in the Edgebanding category, is intended for covering exposed edges in woodworking projects where PVC is specified. The 1-5/16 inch width gives reach across common panel thicknesses used in cabinets and casework, supporting consistent visual lines on cabinet doors, shelves, and uprights. At 3mm thick, the banding forms a durable-feeling edge profile that suits applications where the edge is frequently touched, such as door fronts or drawer fronts in typical woodworking and cabinet environments. The FLEX characteristic allows this edgebanding to follow straight edges commonly found in cabinetry layouts, aligning with production on edgebanders or controlled hand-application runs. With a 300FT roll length, shops can handle multiple cabinets or furniture pieces from one roll, helping maintain the same finish identification, CP50003 LAC, across an entire run.
The defined 1-5/16 inch width on this Rehau PVC edge banding simplifies setup because operators can standardize trimming settings around a known overhang, supporting repeatable results from piece to piece. The 3mm thickness works well with common trimming and routing tools, which helps maintain a straight, chip-free edge line along cabinets and furniture components. The FLEX description indicates that the band is designed to track typical cabinet edges without undue stiffness, supporting smooth feed rates on edgebanding machines and reducing adjustments between passes. The CP50003 LAC finish code identifies a specific appearance within Rehau PVC edgebanding, so shops can align this banding with panels chosen to match that designation across a project. The 300FT roll length also supports planning for production sequences, allowing longer continuous runs that keep edge finish and thickness uniform across groups of parts.
Rehau PVC edgebanding 303334-105 is specified as 1-5/16 inches wide and 3mm thick, giving coverage for common panel edges with enough material for trimming back to a flush, finished line.
This edgebanding is described as FLEX, indicating a flexible PVC construction intended to follow typical straight cabinet and furniture edges during application on standard woodworking projects.
This Rehau edge banding 300FT roll provides 300 feet of PVC edgebanding, supporting extended cabinet or furniture runs before changing material during shop production.
The CP50003 LAC designation on this PVC edgebanding identifies a specific Rehau finish series, helping maintain the same visual appearance across multiple panels and projects.
This product is classified as Edge Banding in the Edgebanding category, suiting woodworking projects such as cabinets and furniture where exposed panel edges require a PVC edge finish.
Rehau PVC edgebanding 303334-105 is manufactured by Rehau, Inc., providing a defined PVC edge banding solution identified by manufacturer part number 303334-105.
This Rehau PVC edgebanding 303334-105 from Wurth Baer Supply combines a 1-5/16 inch width, 3mm thickness, FLEX construction, CP50003 LAC finish designation, and 300FT roll length to support consistent PVC edges on cabinet and woodworking projects. Select this specific edge banding when a defined Rehau PVC profile, finish code, and extended roll length align with your shop standards and production runs.
Sold In: 1 Roll