Rehau PVC edgebanding 303334-109 is a PVC edge banding from Rehau, Inc. that covers and finishes raw panel edges so exposed substrate is concealed and the edge presents a consistent banded surface. The 1-5/16 inch width gives coverage for typical panel thickness with a margin to trim back, which supports precise flush-trimming in cabinet or fixture work. The 3mm thickness creates a substantial edge profile, so the banding forms a defined radius or chamfer when machined in place. The FLEX CP50046 LAC designation identifies a flexible PVC formulation, which allows this banding to follow straight runs or gentle curves on casework without resisting the substrate. Supplied in a 300 foot length, the roll format supports longer production runs and reduces changeover time between jobs. As a product within the Edge Banding class, it integrates into standard woodworking workflows where PVC edgebanding is preferred.
The 1-5/16 inch width on this Rehau PVC edge banding gives installers room to align the strip along the panel while still having extra material for top and bottom trimming. That extra width supports consistent visual results when using common edge banding machinery or hand trimmers. The 3mm thickness works well with standard edge-routing passes, because the banding presents enough material to shape a smooth transition from face to edge. The FLEX note in the SAP description signals a flexible PVC construction that responds predictably under normal edge banding pressure, aiding glue-line contact along the length. With a 300 foot roll, the format supports feeding through automatic banders or manual setups without frequent roll changes, which helps maintain even feed rate and heat or adhesive settings from part to part.
This Rehau PVC edgebanding, identified by manufacturer part 303334-109, fits applications where a PVC edge band is required across cabinet, fixture, or general panel-based projects. The 1-5/16 inch width suits panels where the finished thickness is comfortably covered by that width, allowing trimming down to a neat edge with typical tools. The 3mm construction supports use on parts that benefit from a more substantial edge than thin tape-style banding, such as doors or exposed ends of casework. As an Edge Banding product in the Miscellaneous|Edgebanding category, it aligns with shop environments already working with panel products and edgebanding stations. The FLEX CP50046 LAC description marks it as suitable where a flexible PVC edge is preferred over more rigid edge materials on straight or slightly contoured edges.
The PVC material described in the product name provides a predictable machining behavior, so cutting, trimming, and profiling operations on this edge banding follow patterns familiar to installers already working with PVC edges. The 3mm thickness, documented in the SAP description, allows trimming blades to register on a defined surface, which supports clean, repeatable passes without the banding feeling too fragile under tool pressure. The 1-5/16 inch width gives a buffer on either side of common panel thicknesses, so small alignment variations during application still trim back to a straight, uniform reveal. The FLEX CP50046 LAC designation indicates a flexible PVC variant, which helps the banding lay down smoothly along the substrate during feed, supporting even adhesion along the full 300 foot length. Using the specific 303334-109 part number across orders maintains continuity when matching prior work or coordinating multiple production batches that rely on the same Rehau PVC edgebanding characteristics.
Rehau PVC edgebanding 303334-109 has a width of 1-5/16 inch and a thickness of 3mm, so it covers typical panel edges with enough excess for trimming to a clean, flush finish.
The 3mm thickness on this PVC edge banding provides a substantial edge, which allows routers and trimmers to cut a smooth profile or radius without the material feeling overly thin during processing.
The FLEX CP50046 LAC description indicates a flexible PVC edgebanding variant, which helps the strip conform along panel edges and support consistent contact during application in common shop setups.
The Rehau 303334-109 PVC edgebanding is supplied in a 300 foot length, which supports extended cabinet or panel runs from a single roll in production or shop environments.
This Rehau PVC edge banding suits cabinet, casework, and panel-based projects where a 1-5/16 inch wide, 3mm thick flexible PVC edge is appropriate for covering and finishing exposed edges.
The 303334-109 part number uniquely identifies this specific Rehau PVC edgebanding, which helps match existing installations and simplifies reordering the same width, thickness, and formulation.
This Rehau PVC edgebanding 303334-109 combines a 1-5/16 inch width, 3mm thickness, and FLEX CP50046 LAC flexible PVC construction to support clean, consistent panel edges in woodworking projects. The 300 foot roll format aligns with shop or production use where multiple cabinets, fixtures, or panels draw from the same edge material. With the manufacturer part number 303334-109 clearly defined, specifying or repeating this exact edge banding on future jobs stays straightforward. Choose this Rehau edge banding when a PVC edge solution with these documented dimensions and characteristics aligns with your cabinet or casework requirements.
Sold In: 1 Roll