Rehau PVC edgebanding identified as 303334-124 is a PVC edge banding product that covers and finishes exposed substrate edges, so cabinet and woodworking projects present a uniform, protected edge. The SAP description 1-5/16X3MM FLEX CP40603 LAC 300FT specifies a 1-5/16 inch wide strip, which matches typical cabinet and panel thicknesses so edges are fully covered in one pass. The 3mm thickness stated in the description provides a substantial edge profile that stands up to normal handling along cabinet fronts and panels. The 300FT length described in the SAP data offers a continuous roll suited to running multiple parts in a job, reducing stops for roll changes on repetitive cuts. The PVC material designation supports use in woodworking environments where a synthetic edging is preferred around cabinets, furniture parts, or other board-based assemblies.
The SAP description 1-5/16X3MM FLEX CP40603 LAC 300FT defines a 1-5/16 inch wide, 3mm thick Rehau PVC edge banding, so installers can select this roll when panel thickness and edge design call for that coverage. The 3mm thickness noted in the description supports an edge profile that can be trimmed flush to the face and back edges of panels, then eased or lightly profiled, while still leaving a strong PVC face at the corner. The 300FT length described allows the roll to be set up on manual or automatic edge application equipment for longer runs without frequent changeovers, which keeps workflow steady on multi-piece cabinet or furniture projects.
The product name Rehau PVC Edgebanding, 303334-124, places this item in the edge banding class used across woodworking projects, so it can be applied to exposed edges of panels in cabinets, furniture, or casework within that scope. The category Miscellaneous|Edgebanding and product class Edge Banding identify it as a dedicated edging solution rather than a general trim, which aligns it with jobs that use sheet goods and require a defined, protected edge. The 1-5/16 inch width specified in the SAP description allows this edgebanding to match panel thicknesses that fall within that coverage, making it suitable when designers call for a 3mm PVC edge on boards of similar overall thickness. The Rehau, Inc. branding connects the roll to a known manufacturer of edgebanding products within the woodworking industry, supporting use on projects that already specify Rehau PVC solutions.
The 3mm thickness, as stated in the SAP description, gives this Rehau PVC edgebanding enough material at the edge for trimming equipment to cut back to the panel surface while keeping a solid band at the corner, which is helpful when parts are handled repeatedly on site or in the shop. The 300FT length referenced in the description suits production runs where multiple doors, drawer fronts, or case parts share the same edging, because one roll can serve numerous components before changing material. The manufacturer part number 303334-124 and the Web Description code WBSC - 1432 - RU303334-124 help shops record this exact PVC edge banding in job notes or inventory systems, so reorders align with past work. The FLEX CP40603 LAC notation in the SAP description further distinguishes this specific version within the Rehau line, which matters when matching existing installations or specifications that call out that designation.
Rehau 303334-124 is a PVC edgebanding in the edge banding product class, so it is used to cover and finish exposed panel edges in woodworking projects.
The SAP description 1-5/16X3MM FLEX CP40603 LAC 300FT states a 1-5/16 inch width and 3mm thickness, which sets the coverage and edge profile this banding provides on panels.
The edgebanding is identified with a 300FT length in the SAP description, allowing multiple cabinet or furniture parts to be edged from a single continuous roll.
The product name specifies PVC edgebanding, so the edging is made from PVC and is suited to typical woodworking substrates requiring a synthetic edge treatment.
The brand is Rehau, Inc., which identifies the manufacturer and helps align this PVC edge banding with projects that specify Rehau products.
The 3mm thickness listed in the SAP description gives enough material for trimming and light profiling, while maintaining a substantial PVC edge on cabinet and panel parts.
The combination of 1-5/16 inch width, 3mm thickness, and 300FT length defined in the SAP description gives this Rehau PVC edgebanding a clear role on cabinet and woodworking jobs needing that size. The manufacturer part number 303334-124 and reference WBSC - 1432 - RU303334-124 connect directly to this exact roll, so it can be chosen when project notes or drawings specify that identification. For projects set up around Rehau PVC edge banding in this dimension range, this product offers the defined width, thickness, and roll length needed to carry edging across multiple matching parts.
Sold In: 1 Roll