Rehau PVC edgebanding gives a finished PVC edge along exposed panel sides, so raw substrate is covered and workpieces present a uniform edge line. The 1-5/16 inch width spans common panel thicknesses with room for trimming, which helps installers flush the edge after bonding for a straight, consistent finish. The 3mm thickness builds a solid edge profile, so the transition from face to edge feels substantial on cabinets and casework. This flexible CP20005 LAC edgebanding conforms along standard straight runs, supporting routine shop and jobsite layouts. A 300FT length supplies continuous material for multiple parts, so longer runs can be processed from the same roll without frequent changeover. With Rehau, Inc. branding and part number 303334-164, shops can match this specific edge material across repeat jobs and service work.
The 1-5/16 inch dimension on this Rehau PVC edgebanding provides usable width beyond common panel thicknesses, so trimming equipment can remove overhang and leave a tight edge line. At 3mm thick, the banding produces a pronounced edge that machines cleanly during flush trimming and end cleanup. The flexible CP20005 LAC construction supports typical edge-banding equipment setups, allowing continuous feeding along straight stock for repeatable results. With 300FT available on the roll, shops can stage longer production runs without pausing to change material, which helps maintain a steady installation rhythm on cabinets, shelving, and similar assemblies.
This Rehau, Inc. 303334-164 PVC edgebanding is suited to panel-based woodworking where a durable edge is needed along exposed sides. The 1-5/16 inch width accommodates standard panel builds, so cabinet boxes, doors, and shelving edges can be covered while still allowing trim clearance. The 3mm thickness gives cabinet and furniture components a noticeable edge profile that complements laminated or surfaced faces. CP20005 LAC flexible construction helps the edgebanding run along straight cabinet carcasses and tall panels without fighting the material, supporting smooth feed on common edge-banding equipment. The 300FT roll length aligns with shop batch work, allowing series of doors or panels to share the same roll for consistent color and thickness across a project.
The 1-5/16 inch by 3mm sizing of this Rehau PVC edgebanding provides a combination of coverage and trim allowance that supports accurate edge finishing. Extra width beyond panel thickness lets installers position the banding confidently, then trim both faces without exposing core material. The 3mm build offers enough material for precise flush trimming and corner detailing while retaining a solid feel after machining. CP20005 LAC flexibility helps maintain contact along straight runs, which supports even bonding and reduces edge waviness on doors and casework. The 300FT roll supports planning material usage across multiple cabinets or room sections, helping shops allocate one identified roll - Rehau part 303334-164 - to a defined phase of work for consistent results.
The Rehau PVC edgebanding is specified at 1-5/16 inch wide by 3mm thick, giving coverage beyond panel thickness with material left for trimming to a flush, finished edge.
The 3mm thickness builds a substantial edge profile that trims cleanly, so cabinet doors and panels have a defined, solid-feeling edge after machining and finishing operations.
The Rehau 303334-164 PVC edgebanding is supplied in a 300FT length, supporting longer production runs and helping maintain consistent appearance across multiple parts.
The 1-5/16 inch width gives extra coverage over common panel thicknesses, which allows positioning, bonding, and trimming while keeping the substrate fully concealed at the edge.
CP20005 LAC identifies the flexible PVC edgebanding construction, so installers can match this specific material type when repeating work or extending an existing project.
The Rehau 303334-164 part number ties size, material, and finish together, helping shops reorder the same PVC edgebanding for consistent cabinet and panel edges.
The Rehau PVC edgebanding 303334-164 pairs a 1-5/16 inch width with a 3mm thickness, giving panel and cabinet edges full coverage and a solid feel. CP20005 LAC flexible construction runs along straight workpieces, while the 300FT roll supports batch processing in the shop. Selecting this specific Rehau part number keeps future work aligned with the same dimensions and material, helping projects maintain consistent, professional-looking PVC edges from one phase to the next.
Sold In: 1 Roll