Rehau PVC edgebanding 303334-173 is a PVC edge banding that finishes raw board edges on cabinets, furniture, and casework, creating a consistent transition from panel surface to edge. The 1-5/16 inch width covers common panel thicknesses with enough tolerance for trimming, which helps installers achieve a straight, flush edge without exposing the core material. The 3mm thickness provides a substantial edge profile, supporting impact resistance at door and drawer fronts in high-touch areas. The flexible FLX construction lets the edgebanding follow gentle contours and minor panel variations, which reduces stress at the glue line during everyday use. The CP40817 designation and LAC reference identify the specific color and surface match within Rehau, so shops can align this edgebanding with their chosen laminate or board program across multiple jobs. Supplied on a 300 foot length, it serves production runs and repeat work around the same finish.
This Rehau PVC edgebanding uses its 1-5/16 inch width to cover the face of typical panel thicknesses while leaving material for trimming, giving fabricators room to align, bond, and then flush-route the edge. The 3mm thickness means the banding presents a defined front edge after trimming, which is useful on doors, drawer fronts, and exposed carcass sides where the edge is visible and subject to handling. The flexible FLX PVC structure allows the tape to follow very slight curves or panel tolerances, supporting continuous glue contact along the edge during application. With a 300 foot roll length, shops can set up an edgebander once and run multiple components in sequence, helping maintain consistent edge quality and finish across an entire set of parts.
This Rehau PVC edgebanding, identified as 303334-173 and described as edge banding, is suited to closing off raw edges on cabinetry, furniture, and other panel-based builds where a PVC edge is specified. The 1-5/16 inch width accommodates common engineered panel thicknesses used in shops, so door, drawer, and carcass parts can all be processed within the same width standard. Because the material is PVC with a flexible FLX construction, it adapts to modest variations along the edge, such as small panel tolerances or factory-sanded faces, which supports a continuous bond line during typical edgebanding equipment runs. The CP40817 LAC reference ties this product to a defined color and finish family within Rehau, giving project planners a consistent edge option to pair with matching surfaces across modular lines, built-ins, or commercial fixtures. On multi-piece assemblies, the 300 foot roll length supports repeating the same edge finish across many parts without changing product mid-stream.
The 3mm thickness of this Rehau PVC edgebanding gives each finished edge a noticeable, stable profile, helping the banding stay firm under routine contact at door fronts and exposed verticals. That extra material thickness provides a margin for trimming and light post-finishing, which helps installers reach a flush edge without risking cut-through to the substrate. The flexible FLX construction works together with the 3mm thickness to maintain surface contact as the banding is applied along long panels or around minor curves, helping the adhesive layer stay evenly compressed. Because the edgebanding is supplied in a 300 foot length, shops can dial in edgebander settings once for this 3mm PVC and run large batches with the same cut, radius, and scrape program, supporting repeatable results shift after shift. The specific CP40817 LAC identification helps reduce finish variability from job to job, since the same reference can be specified again when the same edge look is required.
Rehau PVC edgebanding 303334-173 has a width of 1-5/16 inch, giving installers enough coverage and trimming allowance to finish standard panel edges cleanly on doors, drawers, and carcass parts.
This Rehau PVC edge banding is 3mm thick, providing a substantial edge profile that supports impact resistance and allows precise trimming without exposing the underlying board.
The FLX description indicates a flexible PVC construction, which helps the edgebanding conform to slight panel variations and maintain consistent glue contact along the edge during application.
The Rehau 303334-173 PVC edgebanding is supplied in a 300 foot length, supporting extended production runs and allowing multiple components to share the same edge finish.
The CP40817 LAC reference identifies a specific color and surface series within Rehau, helping shops select this edgebanding to visually coordinate with matching laminated or coated panels.
This Rehau PVC edgebanding suits cabinet, furniture, and casework projects using panel construction, where a 3mm PVC edge is desired for finished doors, drawers, and exposed carcass edges.
The Rehau PVC edgebanding 303334-173 pairs its 1-5/16 inch width, 3mm thickness, and flexible FLX PVC with a defined CP40817 LAC surface reference, giving shops a repeatable solution for closing panel edges. With a 300 foot length dedicated to this specification, fabricators can run doors, drawers, and case components through the same setup while keeping the edge appearance aligned across the job. For cabinet, furniture, or general casework work using panel construction, this PVC edge banding provides a precise way to move from raw board edge to a consistent finished line.
Sold In: 1 Roll