Rehau PVC edgebanding 303334-184 provides a PVC edge banding solution for finishing exposed panel edges with a consistent look across woodworking projects. The 1-5/16 inch width covers common panel thicknesses, so the edge can be trimmed flush while maintaining full coverage. The 3mm thickness gives a substantial edge profile that helps panels feel solid at contact points. The flexible design referenced in the description supports working around gentle curves or uneven substrates, which helps reduce delays when panels are not perfectly straight. The CP40707 designation and embossed lacquer finish define a specific texture and surface look, allowing projects that use this profile to match existing runs that share the same code. A 300ft length supports multiple cabinets or casework runs from one continuous roll, which reduces changeovers during production runs.
The 1-5/16 inch width on this Rehau PVC edging gives installers extra material past the face of typical panels, so trimming equipment can cut back to a precise line without exposing substrate. The 3mm thickness defines the edge build-up the installer will see against doors, drawer fronts, or case edges, which helps plan reveals and clearances in the design phase. The CP40707 designation identifies the specific embossed lacquer look, so when this code is specified on drawings, this exact profile can be selected to meet that callout. With a flexible PVC construction noted in the description, the material conforms more readily during application, which helps maintain adhesion across slight panel irregularities.
This Rehau PVC edgebanding 303334-184 is suited to woodworking environments where exposed panel edges require a PVC finish that matches a specified CP40707 embossed lacquer look. The 1-5/16 inch by 3mm size works on cabinet boxes, shelving, or furniture panels that need a thicker edge profile along fronts or sides. The 300ft roll length supports shop situations where the same edge profile runs across many parts, such as a full kitchen, bank of casework, or series of fixtures using the same finish code. Because the product is categorized as edge banding, it fits into workflows that rely on edgebander equipment or manual banding processes designed for PVC tape of this width and thickness.
The defined 1-5/16 inch width of Rehau edge banding 3mm lets shops standardize trim settings, since every roll with this part number presents the same overhang before trimming. The 3mm thickness establishes a consistent edge reveal that can be repeated across multiple jobs calling for the same substantial profile. The CP40707 embossed lacquer identifier ties appearance and surface feel directly to the Rehau 303334-184 code, which helps maintain uniformity when replacing damaged edges or extending an existing installation. The flexible PVC construction described in the product text allows the banding to follow moderate contour or minor substrate variation, which supports even pressure during application and helps achieve a uniform finished line along the length of the panel.
Rehau PVC edgebanding 303334-184 is specified as 1-5/16 inches wide by 3mm thick, which defines the coverage and edge build you can plan into cabinet and panel layouts.
The CP40707 embossed lacquer designation identifies a specific surface texture and lacquered finish, allowing projects to match this exact Rehau appearance when the same code is called out.
The 3mm thickness of this edge banding creates a pronounced edge profile, which can provide a more substantial front appearance on cabinets, shelves, and furniture panels.
The 1-5/16 inch width offers extra coverage beyond typical panel faces, giving trimming tools enough material to cut back cleanly without exposing the underlying substrate.
The flexible PVC construction referenced in the description allows the banding to conform to mild panel variations, supporting consistent contact along the glue line during application.
The 300ft length lets shops run many parts using the same Rehau PVC edge banding before changing rolls, which helps maintain continuity on larger cabinet or casework projects.
Choose Rehau PVC edgebanding 303334-184 when a 1-5/16 inch by 3mm PVC edge with the CP40707 embossed lacquer finish is required across multiple panels. The defined size, flexible PVC construction, and 300ft length support repeatable edging results on cabinet, furniture, and casework jobs that specify this exact Rehau profile.
Sold In: 1 Roll