Rehau PVC edgebanding 303334-193 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cut boards present a uniform, workable edge instead of a raw substrate. The product is identified as edge banding in the Edgebanding category, so it is intended to cover and protect the edge of sheet goods where a professional transition is needed. The manufacturer part number 303334-193 ties this roll directly to Rehau documentation on shop drawings and cut lists, which helps keep material calls clear between office and floor. The SAP description states 1-5/16X3MM FLX CP40281 LAC 300FT, indicating an approximate 1-5/16 inch width that matches common panel thicknesses where a slight overhang is trimmed, reducing layout time. The specified 3mm thickness creates a more substantial edge profile than thin tape, which supports heavier use areas while still allowing standard edge-banding machining.
The SAP description 1-5/16X3MM FLX CP40281 LAC 300FT shows this Rehau PVC edge banding is supplied as a roll with an approximate 1-5/16 inch width, giving edge coverage that exceeds a typical 3/4 inch or similar panel thickness and leaves material to trim back to flush. The 3mm thickness offers a robust working edge that accepts standard trimming, scraping, and light profiling without feeling overly delicate in the machine. The flexible PVC construction noted by FLX means the banding is suited to straight runs commonly processed on edgebanders or applied by hand with appropriate equipment, supporting a predictable workflow in cabinet and casework production.
This product is classified by Wurth Baer Supply under Miscellaneous|Edgebanding with a product class of Edge Banding, so it is positioned for woodworking and cabinet-related applications where exposed edges on panels need to be covered with a PVC strip. The approximate 1-5/16 inch width from the 1-5/16X3MM description allows it to be used on panels where the finished thickness is less than the banding width, providing an overhang on both faces that can be trimmed for a flush, clean edge. That overhang is valuable on cabinet sides, shelving, and casework parts, because it lets installers and shop staff correct for minor panel-size variation and still deliver a straight, aligned edge. The flexible PVC described by FLX is appropriate for straight edges on cabinets, fixtures, and similar projects that run through common shop processes, supporting repeatable bonding and trimming without requiring specialty handling beyond normal PVC edgebanding workflow.
The 3mm thickness detailed in the SAP description gives this Rehau PVC edgeband a more substantial edge profile compared with very thin tapes, which helps create a solid-feeling edge on doors, drawer fronts, and casework components that will see regular contact. That thickness also provides enough material for precise trimming and light profiling without cutting back directly to the substrate, supporting a smooth transition from face to edge after machining. The 300FT length noted in the description provides a continuous supply for a significant number of parts, which reduces setup interruptions on edgebanders or during manual application and helps maintain consistent heat and feed settings across many workpieces. The combined width, thickness, and roll length give shops a predictable material that slots into existing edgebanding routines when edge coverage, trim allowance, and part volume are planned around a 1-5/16 inch by 3mm PVC strip.
Rehau PVC edgebanding 303334-193 is described as 1-5/16X3MM, providing an approximate 1-5/16 inch wide, 3mm thick strip that covers typical panel edges with trim allowance for a flush finish.
This Rehau PVC edge banding is listed at 300FT, giving a continuous length that supports longer runs of cabinet or casework parts without frequent material changeovers during production.
Rehau edgebanding 303334-193 is identified as PVC edge banding, so it uses PVC material, which is suited to standard PVC edgebanding equipment and trimming tools in woodworking shops.
The FLX reference in the description indicates flexible PVC edgebanding, allowing the strip to handle straight cabinet edges while working with typical edgebanding and trimming processes.
The 3mm thickness provides a thicker edge profile, giving parts a more substantial edge that tolerates trimming and light profiling while maintaining a solid-feeling edge on doors and panels.
The 303334-193 manufacturer part number uniquely identifies this specific Rehau PVC edgebanding, helping match drawings, cut lists, and reorders so projects use the same material each time.
Rehau PVC edgebanding 303334-193 from Wurth Baer Supply combines an approximate 1-5/16 inch width, 3mm thickness, and a 300FT flexible PVC roll to support cabinet and casework edge finishing. When project specifications or shop standards call for this Rehau, Inc. part number, choosing this edge banding keeps the material consistent with drawings, estimates, and prior runs. For woodworking operations that rely on predictable edge coverage and a thicker PVC profile on their parts, this Rehau edge banding offers a defined, repeatable option tied directly to the 303334-193 identifier.
Sold In: 1 Roll