Rehau PVC edgebanding 303334-227 gives you a defined PVC edge on panels where a matching, durable band is required. The 1-5/16 inch width covers standard panel thicknesses with room for trimming, which helps produce a straight, finished edge after machining. Its 3mm thickness builds a substantial edge profile, supporting a solid feel on doors, shelves, and casework ends. The flexible "FLX" PVC construction follows normal panel runs and gentle curves, which supports consistent adhesion along the length. A 300 ft length supports longer production runs or multiple projects from a single part number, which simplifies material planning on repetitive cabinet or fixture work. Identifying the product by manufacturer part 303334-227 ties this specific color and specification to drawings or cut lists, helping keep replacements and reorders aligned to the same Rehau material.
This Rehau PVC edge banding uses a 1-5/16 inch width that allows trimming on both sides of typical panel thicknesses, which supports a clean, centered edge after machining. The 3mm gauge produces a thicker band, which helps the material track steadily through edgebanders and provides an edge that can be profiled as required. Its description as FLX PVC indicates it is formulated as flexible edgebanding, which supports feeding through standard automatic or manual edge application equipment handling flexible strips. With a 300 ft length on this SKU, one roll supports edging across a full job or series of cabinets, which can streamline setup on repetitive passes and maintain the same Rehau material from start to finish.
As a PVC edgebanding in the edge banding product class, Rehau 303334-227 is suited for finishing raw panel edges in woodworking and casework fabrication. The 1-5/16 inch width works where sheet goods and components need a band wider than the final thickness, which allows trimming to a flush finish at both faces. At 3mm thick, this banding builds a strong edge line on cabinet doors, drawer fronts, and shelving components, which is useful where a more substantial edge appearance is specified. The FLX PVC makeup supports runs along straight cabinet sides, tall panels, and moderate radius details commonly found in commercial and residential millwork layouts.
The Rehau 303334-227 part number ties a specific 1-5/16 inch by 3mm FLX PVC configuration to project documents, which aids repeatable ordering and consistent results when matching earlier work. The 300 ft length helps maintain uniform feed characteristics through edge banding equipment over many parts, which supports consistent heat and pressure settings across a full run. Using a 3mm PVC strip provides more material at the corner, which supports light profile passes or small radius edges without cutting through to the substrate. Because this is classified as edge banding by Wurth Baer Supply, it fits directly into standard edgebanding stages in the shop workflow, aligning with cutting, banding, trimming, and final machining steps.
The Rehau 303334-227 PVC edgebanding is 1-5/16 inch wide and 3mm thick, which provides trim allowance and a substantial edge profile on cabinet and panel components.
The 3mm thickness gives a heavier edge that can handle light profiling, which supports durable, defined edges on doors, shelves, and casework fronts.
FLX on this PVC edgebanding indicates a flexible formulation, which helps the strip follow straight runs and gentle curves during the edge banding process.
The Rehau PVC edgebanding 303334-227 is specified at 300 ft in length, which supports edging multiple cabinets or longer runs from a single roll.
Part number 303334-227 identifies this exact size and type of Rehau PVC edgebanding, which helps align shop drawings, orders, and repeat jobs to the same material.
This Rehau product is classified as edge banding in the edgebanding product class, which fits standard woodworking processes that finish raw panel edges.
Rehau PVC edgebanding 303334-227 from Wurth Baer Supply delivers a 1-5/16 inch by 3mm FLX PVC edge in a 300 ft length, supporting consistent edges across full cabinet or millwork runs. Selecting this specific Rehau part number ties field work, shop production, and reorders to one defined edge banding specification, which supports visual and dimensional consistency across projects.
Sold In: 1 Roll