Rehau PVC edgebanding 303334-247 is a PVC edge banding that covers and protects raw panel edges on casework and components, so exposed substrates are concealed and the finished piece presents a uniform edge line. The 1-5/16 inch width stated in the description gives coverage for standard panel thicknesses with a bit of margin, so installers can trim flush without exposing core material. The 3mm thickness detailed in the SAP description provides a substantial edge, so impact-prone areas receive more material at the edge profile. The flexible designation in the description indicates a bendable PVC construction, so this banding conforms more readily to gentle curves and standard straight runs during processing. The 300 foot length in the description offers an extended run from a single roll, so larger jobs or multiple smaller projects proceed with fewer roll changes.
The 1-5/16 inch width identified in the SAP description gives installers working room during application, so minor alignment variation is still correctable during the trimming stage without risking substrate reveal. The 3mm thickness also documented in the description creates a workable edge for cutting and flushing, so trimming tools engage meaningful material rather than a thin film. Because the banding is described as flexible PVC, it responds predictably to typical edgebander feed systems, so consistent tension and feed-through can be maintained on production runs. The 300 foot roll length noted in the description keeps a continuous supply on hand during setup and running, so production lines can run longer without pausing to change rolls.
The product is listed under edge banding and specifically described as Rehau PVC edgebanding, so it is intended for covering raw edges on panels used in cabinetry, fixtures, and related woodworking assemblies. The 1-5/16 inch width stated in the description means it fits well on panels around standard casework thicknesses, so vertical gables, shelves, and tops can all use the same size band. With a 3mm thickness called out in the SAP description, the banding is suited to applications where a thicker edge is desired, such as cabinet doors or high-traffic fronts that take more knocks. The flexible designation associated with the banding supports use on straight components and mild curves, so shops can handle a mix of parts without changing to a different edge material.
The 1-5/16 inch width documented in the description provides edge overhang across typical panel thicknesses, so operators can set up edgebanders and trimmers for consistent flush results without fighting tight tolerances at the margin. The 3mm thickness listed in the SAP description delivers a robust edge section for cutting and profiling, so end trimming, corner rounding, or light profiling can be performed while still leaving solid PVC at the visible edge. The flexible PVC construction referenced in the description promotes even seating along the substrate edge under feed rollers, so adhesive bonds can develop across the full contact area instead of relying on a stiff strip. The 300 foot roll length noted in the description simplifies planning for runs, so cutting lists and feed sequences can follow longer continuous sequences without frequent material changes that could introduce visual breaks from one roll to the next.
Rehau 303334-247 is a PVC edgebanding classified as edge banding, so it is used to finish and protect exposed panel edges on cabinetry and other woodworking projects.
The SAP description specifies a 1-5/16 inch width, so the banding covers typical panel thicknesses with extra material for trimming to a clean, flush edge.
The SAP description lists a 3mm thickness, so the edge presents a substantial, durable profile suited to doors, fronts, and higher impact cabinet areas.
The description notes the banding as flexible, so the PVC material bends to follow straight lengths and mild curves, supporting smoother application on varied parts.
The 300 foot length described for this roll supports longer production runs, so operators can edge more components before pausing to load another roll.
This Rehau PVC edgebanding is supplied by Wurth Baer Supply, a specialty wholesale distributor serving the woodworking industry with cabinet hardware and related materials.
The Rehau PVC edgebanding 303334-247 combines a 1-5/16 inch width, 3mm thickness, and flexible PVC construction, so shop teams can process cabinet and casework edges with a single, substantial banding profile. With a 300 foot roll length documented in the description, this edge banding supports extended runs and streamlined handling on edgebanders or manual setups. For woodworking operations sourced through Wurth Baer Supply, this specific Rehau PVC edgebanding provides a defined size and material profile that can be planned into cutting lists and standard edge treatments across cabinets, fixtures, and related projects.
Sold In: 1 Roll