Rehau PVC edgebanding 303334-249 is a PVC edge banding designed to finish exposed panel edges with a consistent look. The SAP description 1-5/16X3MM FLX CP60267 LAC 300FT identifies this as 1-5/16 inch wide and 3mm thick material, so it suits projects built around that edge size. The PVC construction creates a uniform edge surface that aligns with typical woodworking panels in this dimension range. The FLX designation describes a flexible banding, which helps the material follow routine edge runs in cabinet and furniture work. The CP60267 LAC detail identifies a specific finish reference, which supports visual coordination anywhere that finish is required. A 300FT length description indicates a continuous run sized for production-oriented or multi-piece jobs where repeated edge treatment is needed.
This Rehau PVC edgebanding uses a 1-5/16 inch width to cover edges that are laid out for that dimension, creating a defined trim margin for routine machining or trimming operations. The 3mm thickness establishes the edge build you will work with when flushing and profiling, which affects how corners meet adjoining parts. PVC material pairs with the flexible FLX designation so the banding can track typical cabinet or casework edges during application. The 300FT length description supports shop setups that prefer longer runs, so edges on series-built components can be processed with the same banding reference across the job.
This Rehau, Inc. PVC edge banding is categorized as Edgebanding, aligning it with woodworking tasks that dress raw panel edges. The 1-5/16 inch width targets panel layouts that expect that exact coverage, so the band sits over the edge without excessive overhang. With a 3mm thickness, the banding creates a noticeable, defined edge that works in cabinet or furniture builds where a thicker band is part of the design. The FLX note in 1-5/16X3MM FLX CP60267 LAC 300FT points to flexible behavior, so the PVC banding can follow normal straight edges on case parts and shelves during application. The CP60267 LAC reference ties the strip to a specific finish identifier, which matters wherever the edge appearance needs to align with that finish callout on related components.
The 1-5/16X3MM description gives exact width and thickness, letting you set trimmers and edge tools to work against a known profile for repeatable results from part to part. Because the material is described as flexible PVC, it accommodates typical handling during edging runs, supporting consistent seating along the edge prior to trimming and profiling. The manufacturer part number 303334-249 provides a precise Rehau reference, which helps maintain the same edgebanding on repeat orders when a shop standardizes on this profile and finish. With a 300FT length description, the roll supports longer production sequences using the same edge band, which helps keep visual and dimensional results steady across multiple cabinets or fixtures tied to the same project.
Rehau PVC edgebanding 303334-249 is described as 1-5/16X3MM, meaning it is 1-5/16 inch wide and 3mm thick, so setups can be based on that edge profile.
Rehau PVC edgebanding 303334-249 carries an FLX designation in its description, indicating it is a flexible PVC banding suited to typical edging runs.
Rehau PVC edgebanding 303334-249 has a 300FT length in its SAP description, supporting extended edge treatment across multiple components in a job.
Rehau PVC edgebanding 303334-249 lists CP60267 LAC, identifying a specific finish reference that helps visually coordinate edges where that finish is specified.
Rehau PVC edgebanding 303334-249 is produced by Rehau, Inc., aligning the product with that manufacturers edgebanding system and part numbering.
Rehau PVC edgebanding 303334-249 uses a 3mm thickness, creating a substantial edge that influences trimming and profiling settings on finished parts.
Rehau PVC edgebanding 303334-249 combines a 1-5/16 inch width, 3mm thickness, and flexible PVC construction to handle edge treatment where that profile is specified. The CP60267 LAC identifier and 300FT length support projects that call for a consistent Rehau reference across multiple components. For woodworking environments that standardize around this dimension and finish callout, this edge banding provides a defined option tied directly to manufacturer part number 303334-249.
Sold In: 1 Roll