Rehau PVC edgebanding gives woodworkers a dedicated edge banding solution for covering exposed substrate edges on cabinets, furniture, and similar projects. The 1-5/16 inch width aligns with typical panel thickness plus overhang, helping installers trim back to a crisp, flush edge. The 3mm thickness provides a substantial edge profile that stands up to handling during fabrication and installation. PVC construction creates a consistent, uniform material along the run, which supports predictable trimming and scraping without soft spots. The CP41125 designation identifies the specific Rehau formulation and finish family, so shops can match this edgebanding within projects that reference the same code. A continuous 300ft length on the roll suits production runs or multiple smaller jobs from one stock item, reducing changeovers during banding work. As an edge banding in the Rehau, Inc. line, this product fits directly into woodworking workflows that already specify Rehau PVC solutions.
The 1-5/16 inch width on this Rehau PVC edgebanding gives installers extra coverage beyond the face of typical sheet goods, so it can be centered, bonded, and then trimmed down to a precise final width. The 3mm thickness provides enough material for controlled trimming, scraping, or routing without cutting through to the substrate, which supports a clean visual joint. PVC construction offers a consistent density along the length, so tooling setups can stay the same throughout a run. The 300ft roll format fits into shop edge-band workflows where longer continuous lengths limit seams on cabinet sides, doors, and shelves.
This Rehau, Inc. PVC edgebanding in 1-5/16 inch width and 3mm thickness is suited to edging cabinet parts, furniture components, and panels where a thicker edge profile is specified. The 3mm thickness allows fabricators to create a substantial edge detail on doors, drawer fronts, or shelves, matching designs that call for a more pronounced banded edge. Because the SAP description and part number define a specific Rehau product, it fits projects where drawings or cut lists reference 303334-262 or CP41125. The 300ft roll length enables use across a full job, from carcass parts to finished fronts, so visible edges can share the same material specification for visual continuity.
The defined 1-5/16 inch width allows shops to standardize their edgebander or manual trimming setup around that dimension, helping keep reveal and overhang consistent from part to part. With a 3mm PVC thickness, there is enough material above the substrate for controlled flush trimming and light profiling, which supports smooth edges ready for final finishing steps. PVC as the base material gives a uniform working response to heat and cutting, so once feed speed and trimming parameters are dialed in, they can be used reliably across the 300ft roll. The CP41125 and 303334-262 identifiers also make it straightforward to repeat the same result on future jobs by referencing the same Rehau part.
Rehau PVC edgebanding 303334-262 is specified at 1-5/16 inch width and 3mm thickness, giving coverage for typical panel edges with enough material for trimming to a clean, flush finish.
The 3mm thickness provides a robust edge layer that supports controlled trimming and scraping, helping fabricators achieve a solid, consistent edge profile on cabinet and furniture parts.
The 300ft length allows long, continuous runs on edge banders or manual setups, reducing material changeovers and helping keep edge appearance consistent within a project.
The 1-5/16 inch width provides extra coverage beyond panel faces, so installers can center the banding, bond it, and trim back to a precise, flush edge on both sides.
The CP41125 code identifies a specific Rehau edgebanding formulation and finish family, which helps shops match existing specifications that call out that designation in their documentation.
Manufacturer part number 303334-262 ties this PVC edgebanding to a defined Rehau item, supporting accurate reordering and consistent use across repeated or follow-up projects.
This Rehau PVC edgebanding with 1-5/16 inch width, 3mm thickness, and 300ft length provides a clearly defined edge solution for cabinet and furniture projects. By using the 303334-262 and CP41125 identifiers, shops can align ordering with drawings or cut lists that specify this exact Rehau product. Add this edge banding to your material plan when a 3mm PVC edge and these dimensions match the requirements of your current or upcoming woodworking work.
Sold In: 1 Roll