Rehau PVC edgebanding 303334-269 is a PVC edge banding from Rehau, Inc. that finishes exposed edges on panels, so you can cover raw cores with a consistent, work-ready edge. The 1-5/16 inch width suits panels where that face dimension matches your finished thickness, allowing the band to cover the edge with room for standard trimming. The 3mm thickness provides a substantial edge profile, giving you material to machine flush while maintaining a solid feel at the edge. The CP41009 LAC designation identifies this specific color and finish combination, which helps you repeat the same look across multiple jobs. A 300ft length supports longer production runs or multiple cabinets from one coil, reducing mid-job roll changes.
The 1-5/16 inch by 3mm format of this Rehau PVC edge banding gives you a defined working envelope for installing on cabinet and furniture components. The width allows typical overhang on both sides of a matched panel, so trimmers and routers can remove excess material cleanly while leaving full coverage. The 3mm thickness offers a substantive edge layer to work against guides and bearing bits during flush trimming. With a 300ft roll, you can feed standard edgebanders or manual setups for many parts in sequence, maintaining the same band throughout an entire batch.
This Rehau, Inc. PVC edgebanding, identified as 303334-269, is suited to projects that call for a 1-5/16 inch wide, 3mm thick band on panel edges. When your design uses panels whose finished thickness works with a 1-5/16 inch band, this size lets you fully cover cores with trimmable overhang. The edge banding category placement shows that it is intended for edging cabinet, furniture, or similar panel-based components. The PVC material pairs well with equipment and tooling set up for plastic edgebands, supporting use on casework, doors, and drawer faces built from sheet goods.
The 1-5/16 inch width of this Rehau PVC edgebanding creates a consistent starting point every time you run an edge, helping you set guides and trimmers once for a batch of matching parts. The 3mm thickness offers enough material to flush-trim and lightly profile without thinning the band excessively, which supports a uniform visual line along cabinet runs. The CP41009 LAC designation associates this roll with a distinct appearance, allowing you to repeat the same edge look on replacement parts or future phases of a project. The 300ft roll length aligns with production-style workflows, where staying on a single roll for many components supports steady feed rates and fewer changeovers during edging.
Rehau 303334-269 edgebanding is 1-5/16 inch wide by 3mm thick, giving you coverage and trimming allowance for panel edges that match this width requirement.
Rehau PVC edgebanding 303334-269 is made from PVC, providing a uniform plastic edge that machines predictably during cutting and trimming operations.
Rehau PVC edgebanding 303334-269 is supplied in a 300ft roll, supporting longer runs or multiple cabinets using the same band size and finish.
The 3mm thickness on this PVC edgebanding provides a substantial edge layer, giving you material to flush-trim and lightly profile while maintaining a solid edge line.
The CP41009 LAC designation identifies a specific color and finish combination, helping you repeat the same visual appearance across multiple parts or follow-up projects.
The 1-5/16 inch width gives coverage for matching panel thicknesses with trimmable overhang, allowing clean flush-trim results along cabinet and furniture edges.
This Rehau PVC edgebanding 303334-269 from Wurth Baer Supply combines a 1-5/16 inch width, 3mm thickness, and 300ft roll format for panel edging workflows that rely on repeatable dimensions. When your drawings call out this CP41009 LAC specification, choosing this exact part number keeps your color, thickness, and width aligned from one component to the next. Add it to your order to support consistent edging across current and future projects that share this size and finish.
Sold In: 1 Roll