Rehau PVC edgebanding 303334-272 is a PVC edge banding from Rehau, Inc. that covers raw board edges so cabinet and furniture parts present a finished surface along exposed sides. The 1-5/16 inch width works with panels sized for that edge coverage, helping hide the core material in a single pass. The 3mm thickness gives a solid edge profile, supporting machining of corners and edges where a thin tape might feel light. The FLEX CP20762 designation identifies this as a flexible variant within the Rehau line, which supports forming around modest curves where a rigid profile could fight the substrate. The LAC reference in the description identifies a specific finish or surface setup in the Rehau system, which keeps projects consistent when matching existing runs. Supplied as a 300ft length, this roll format supports multiple jobs or production runs without frequent roll changes during processing.
This Rehau PVC edgebanding uses a 1-5/16 inch width, aligning with panel edges sized so the banding slightly overhangs for trimming on both faces. That dimension lets edgebanding equipment use standard top and bottom trim passes to flush the edge, which simplifies setup on common woodworking machinery. The 3mm thickness works with edgebander settings tuned for thicker PVC, supporting stable tracking through pressure rollers. The FLEX CP20762 characteristics allow the strip to follow small variations in panel straightness, which can reduce the risk of lifting at localized high or low spots along the run.
This Rehau PVC edgebanding, identified by manufacturer part number 303334-272, fits applications where a 1-5/16 inch edge coverage is required on boards. That width supports use on cabinet sides, shelves, and furniture parts built around corresponding panel dimensions, so a single width can handle multiple components cut from the same stock. The 3mm thickness suits projects where a more substantial edge is preferred over very thin tape, such as vertical cabinet sides or frequently handled shelf fronts that benefit from a more solid feel. As a PVC edge banding, it matches workflows that already rely on PVC material for edgebanding, so operators can keep settings and expectations aligned with existing PVC runs. The FLEX CP20762 note in the description points to a flexible behavior, supporting use on parts that may include light curvature or require the banding to track minor panel inconsistencies without stiff resistance.
The 1-5/16 x 3mm sizing of this Rehau PVC edgebanding ties directly into repeatable setup on edgebanders, because the machine can be dialed in once for this width and thickness and then used across matching parts. That consistency matters in production where changes in width or gauge would require new adjustments, costing time and risking edge variation. The 3mm thickness provides enough material for clean trimming and light edge machining, which helps maintain a uniform reveal along doors, drawer fronts, and case edges over multiple passes. The 300ft roll length supports running longer batches from the same roll, which helps keep color and surface appearance uniform across all parts cut from that roll in a single job. Using the 303334-272 manufacturer part number lets shops reorder the same specification, supporting visual continuity when future pieces need to align with earlier work. The combination of FLEX CP20762 flexibility and defined dimensions supports predictable feed behavior, which contributes to fewer edge defects along the run.
Rehau 303334-272 PVC edgebanding is described as 1-5/16 x 3mm, so it covers an edge sized for that width while providing a 3mm thick profile for trimming and light edge machining.
This product is a PVC edgebanding, so it uses PVC material to cover raw panel edges and create a consistent, machinable surface along cabinet and furniture parts.
The Rehau PVC edgebanding 303334-272 is listed at 300ft, providing extended linear coverage for multiple cabinet or furniture components in a single run.
The FLEX CP20762 designation identifies a flexible form of this Rehau PVC edgebanding, helping it follow gentle curves and slight panel variations during application.
The 303334-272 PVC edge banding is manufactured by Rehau, Inc., tying this product into the broader Rehau edgebanding system for consistent future ordering.
The 3mm thickness on this Rehau PVC edgebanding 303334-272 provides a solid edge that supports trimming and light profiling, useful where edges see regular handling.
This Rehau PVC edgebanding 303334-272 from Wurth Baer Supply combines a 1-5/16 inch width, 3mm thickness, and FLEX CP20762 flexibility to support consistent edge finishing on panels sized for that coverage. The 300ft roll length suits both shorter runs and ongoing cabinet or furniture production built around this specification. Using the Rehau 303334-272 part reference keeps reorders aligned with the original material, supporting visual continuity across future work that relies on the same edge profile.
Sold In: 1 Roll