Rehau PVC edgebanding 303334-277 is a PVC edge banding designed to finish exposed panel edges on cabinetry and other woodworking projects, so cut boards present a uniform, protected edge instead of a raw substrate. The 1-5/16 inch width from the 1-5/16X3MM FLEX CP41178 EMB LAC 300FT description gives coverage for common panel thicknesses while allowing a bit of trim for a flush finish, which helps installers dial in a precise edge during processing. The 3mm thickness described in 1-5/16X3MM FLEX CP41178 EMB LAC 300FT provides a more substantial edge than thin tape, supporting a solid feel at door and panel perimeters. The flexible FLEX designation supports work on straight runs and gentle curves, giving shops options across multiple cabinet parts with one material. The PVC material identified in the product name provides a man-made edge surface suited to typical cabinet shop environments where consistent, repeatable edges are important.
The 1-5/16 inch width in the 1-5/16X3MM FLEX CP41178 EMB LAC 300FT description gives installers enough material to align the strip over the panel edge with some overhang, which then trims back for a tight, straight finished line. The 3mm thickness in that same description means the PVC edgebanding presents a substantial edge, which works well with edge banders and trimming tools that are commonly set up for thicker edges. The flexible format referenced by FLEX supports feeding through equipment while accommodating slight variations in panels, helping maintain contact along the full edge. The 300FT length gives shops a continuous run that reduces roll changes during repetitive cabinet or furniture production, helping keep machines running and setups consistent from part to part.
This Rehau PVC edgebanding, identified as 1-5/16X3MM FLEX CP41178 EMB LAC 300FT, is suited to edging panel stock where a 1-5/16 inch wide strip can overhang both faces before trimming, giving a clean finished edge on cabinet sides, shelves, or fronts. The 3mm thickness supports use on doors, drawer fronts, and work panels where a heavier edge is preferred, giving components a defined perimeter that matches many modern cabinet constructions. The PVC material called out in the product name Rehau PVC Edgebanding, 303334-277 makes this strip appropriate for woodworking environments that use man-made panel cores, where a PVC surface can protect the core edge from direct contact. The flexible format referenced by FLEX also allows this strip to work on mild radiused edges within the limits of typical shop equipment, so one edge banding can service several component types.
The precise measurements in the 1-5/16X3MM FLEX CP41178 EMB LAC 300FT description give shops a repeatable spec, so once edge banders and trimmers are dialed in for 3mm thickness and 1-5/16 inch width, operators can run similar parts without changing machine settings. The manufacturer part number 303334-277 links orders directly to this configuration, which helps maintain visual and dimensional consistency when projects span multiple batches or future add-on work. The 300FT length helps reduce mid-job material changes, supporting uninterrupted runs that keep edge color and profile consistent from first part to last. Because the product is classified as Edge Banding in the Edgebanding category, it fits directly into existing layouts where PVC edging is specified, simplifying planning around cut lists and material pull for cabinet and furniture production.
The Rehau PVC edgebanding 303334-277 is described as 1-5/16X3MM, giving a 1-5/16 inch wide strip at 3mm thick, which supports overhang for trimming and a substantial finished edge.
The 3mm thickness from the 1-5/16X3MM FLEX CP41178 EMB LAC 300FT description creates a heavier edge, supporting a solid perimeter on doors and panels and working well with common edge banding equipment.
The FLEX wording in 1-5/16X3MM FLEX CP41178 EMB LAC 300FT indicates a flexible PVC strip, which helps it conform along straight runs and gentle curves during cabinet or furniture edge processing.
The Rehau PVC edgebanding 303334-277 is described as 300FT, providing a 300-foot length that supports extended production runs before changing rolls in shop workflows.
This Rehau PVC edgebanding, identified as Edge Banding in the Edgebanding category, suits cabinetry and woodworking projects that require finished edges on panel-based components.
The manufacturer part number 303334-277 uniquely identifies this Rehau PVC edge banding configuration, helping shops reorder the same width, thickness, and format for consistent follow-up work.
The Rehau PVC edgebanding 303334-277 combines a 1-5/16 inch width, 3mm thickness, and FLEX PVC format described in 1-5/16X3MM FLEX CP41178 EMB LAC 300FT to support consistent panel edge finishing. The 300FT length in that same description suits production-oriented cabinet or furniture work where long runs of matching PVC edge banding streamline shop flow. For projects that call for a PVC Edge Banding in this configuration, this Rehau option allows installers and fabricators to match specifications by part number 303334-277 and keep edge details aligned with project requirements.
Sold In: 1 Roll