Rehau PVC Edgebanding 303334-283 is a PVC edge banding from Rehau, Inc. that finishes raw panel edges, creating a defined border that separates core material from exposed areas. As an edge banding in the Edgebanding product class, it covers the substrate edge so the panel perimeter presents a continuous surface instead of exposed core. The SAP description 1-5/16X3MM FLX CP20953 LAC 300FT identifies it as an edge band sized to match 1-5/16 inch edges at a 3mm thickness, which helps panels maintain a consistent edge profile along cabinet runs or furniture parts. The 300FT length in the SAP description indicates a continuous run suitable for multiple parts, which supports uninterrupted processing on repeated jobs.
The SAP description 1-5/16X3MM FLX CP20953 LAC 300FT defines how this Rehau PVC Edgebanding is supplied for edge work, so installers can plan cut lengths and panel layouts around the 300FT run. The 1-5/16 inch dimension relates to the face width of the banding, which is intended to cover panel edges sized to that width, supporting alignment between the banding and the panel thickness. The 3mm thickness referenced in the SAP description defines the edge banding thickness, which affects how the edge transitions to the panel face and how it fits into a build where 3mm edge bands are specified across multiple components.
The product class listing as Edge Banding and the SAP description 1-5/16X3MM position this Rehau PVC Edgebanding 303334-283 for use on panel edges sized to that width and thickness, aligning the banding face with 1-5/16 inch panel edges. As a PVC edge banding from Rehau, Inc., it serves as a finishing strip on board edges, so raw core at the perimeter is covered by the band instead of remaining exposed along cabinet, casework, or furniture components. The 300FT length indicated in the SAP description supports repetitive edging where multiple parts share the same edge dimension, allowing installers to pull successive lengths from a single run. Because the description identifies this product as FLX, the edge banding is described as flexible, which means it is suited for following typical straight panel edges while maintaining contact with the substrate along the length of each cut piece.
The manufacturer part number 303334-283 and SAP description 1-5/16X3MM FLX CP20953 LAC 300FT give a precise identity for this Rehau 303334-283 edgeband, helping shops match existing drawings or specifications that call out this exact code. The 3mm thickness in the description defines the edge build for this PVC edgebanding 3mm product, so when an assembly is designed around 3mm bands, the finished edges align with door and panel clearances planned around that dimension. The 1-5/16 inch width in the same description sets the usable edge coverage, supporting layouts where panel thickness and trimming allowances correspond to that width. The 300FT length reference helps production planning by identifying the total run available from a single unit, which supports estimating how many edges can be processed before changing to another length of Rehau PVC edge banding roll on a job.
Rehau PVC Edgebanding 303334-283 is a PVC edge banding in the Edgebanding product class from Rehau, Inc., used to cover and finish panel edges in cabinet, casework, or furniture components.
The 1-5/16X3MM designation indicates this edge banding is sized for 1-5/16 inch wide edges with a 3mm thickness, aligning the band face and build with panels designed around that edge dimension.
The 300FT length in the SAP description indicates a long continuous run, supporting multiple edged parts from a single length and simplifying planning for repetitive edging in production work.
The FLX designation in the SAP description identifies this Rehau edge banding as a flexible version, allowing the PVC strip to follow standard edge paths along the length of panels during application.
The manufacturer part number 303334-283 directly ties this PVC edgebanding to Rehau, Inc., allowing shops to specify and reorder the same product identity for repeat jobs or matching existing work.
The 3mm thickness in the SAP description sets the edge build for this PVC edgebanding, so panels and doors designed around 3mm bands maintain consistent reveals and clearances in the completed assembly.
Rehau PVC Edgebanding 303334-283, defined by the SAP description 1-5/16X3MM FLX CP20953 LAC 300FT and manufacturer part number 303334-283, provides a clearly specified edge banding option when a 3mm, 1-5/16 inch PVC edge band is called out on drawings or cut lists.
Sold In: 1 Roll