Rehau PVC edgebanding 303334-284 gives panels a finished edge by covering exposed board, which helps projects look consistent from face to edge on cabinets, fixtures, and other casework. This edge banding is identified as PVC in the product name, so it uses a practical plastic material that works well in typical woodworking shop environments where impact and handling are common. The 1-5/16 inch width stated in the SAP description lets you cover standard panel thicknesses with some trim margin, which helps during setup and flush trimming. The 3mm thickness in the same description provides a more substantial edge profile than thin tape, which supports a solid edge appearance on doors and drawer fronts. The FLEX designation in the SAP description indicates a flexible construction, which helps the banding follow panel edges during application. The 300 ft length noted in the description supports longer runs or multiple jobs from a single product number.
The 1-5/16 inch width listed in the SAP description gives extra coverage beyond common panel thickness, which allows installers to position the banding confidently before trimming. With 3mm thickness confirmed in the same description, this banding builds a noticeable edge profile that can be machined flush to the face, supporting tight visual transitions along cabinet components. The FLEX detail in the SAP description indicates that the banding is designed to flex during use, which supports feeding through typical edgebanding equipment and handling along straight panel edges. The 300 ft length noted in the SAP description means a single coil can serve multiple cabinet runs, which supports uniform edge appearance across a job.
This product is classified as Edge Banding in the Product Class, so it is intended for covering exposed edges on panels in woodworking and cabinet-related work. The 1-5/16 inch width in the SAP description suits panel edges where a little overhang is needed, which helps when trimming flush on cabinet sides, shelves, and doors. With 3mm thickness identified in the same description, this banding supports a more substantial edge look, which works well on visible fronts where the edge is part of the design line. The FLEX callout in the SAP description describes a flexible PVC construction, which is useful in shop workflows that rely on edgebanding machines or hand-fed methods following straight edges. The CP60444 LAC finish reference in the SAP description ties the banding to a specific appearance, which helps maintain continuity on repeat work using the same finish family.
The Rehau, Inc. brand listing in the product data associates this banding with a manufacturer focused on edgebanding, which supports consistent sizing from coil to coil in shop setups. The 1-5/16 inch by 3mm measurement in the SAP description defines both edge height and thickness, which simplifies planning cutter settings and trimming passes so the banding can be brought flush without guesswork. The 300 ft length stated in the description supports running longer sequences of doors and panels from a single coil, which reduces downtime from coil changes and helps maintain the same finish reference across a project. The FLEX wording in the SAP description indicates that the PVC banding is designed to flex along the workpiece during application, which supports stable tracking through edgebanders and reduces handling effort when aligning to the panel edge. The Manufacturer Part # 303334-284 gives a precise identifier, which helps shops repeat orders for the same size and finish once tooling and programs are dialed in around this specific edgebanding.
The Rehau PVC edgebanding 303334-284 is listed in the SAP description as 1-5/16 inch wide by 3mm thick, which sets the trim allowance and edge profile for panel and cabinet work.
This edge banding is specified in the SAP description at 300 ft in length, which supports extended production runs or multiple smaller jobs using a single continuous coil.
The SAP description lists FLEX, indicating a flexible PVC construction that follows panel edges during application, which supports smoother feeding and handling in typical shop workflows.
The SAP description notes CP60444 LAC, identifying a specific finish reference that helps align this PVC edge visually with matching surfaces or repeat orders using the same look.
The product data lists the Product Class as Edge Banding and Category as Miscellaneous|Edgebanding, indicating its role in finishing exposed panel edges in woodworking and cabinet projects.
This PVC edgebanding is identified with Manufacturer Part # 303334-284, which provides a precise reference for matching future orders to the same width, thickness, and finish.
The Rehau PVC edgebanding 303334-284 pairs a 1-5/16 inch width with 3mm thickness as listed in the SAP description, which sets a clear edge profile for cabinet and panel work. The FLEX designation and 300 ft length in the same description support straightforward use in production-style shops handling multiple panels in sequence. The CP60444 LAC reference in the SAP description ties this banding to a consistent finish appearance, which benefits projects that repeat the same color or style across jobs.
Sold In: 1 Roll