Rehau PVC edgebanding 303334-291 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so sheet goods present a uniform, protected edge on cabinets, fixtures, and other woodworking projects. The SAP description 1-5/16X3MM FLEX CP20856 LAC 300FT identifies this as 1-5/16 inch wide, 3mm thick flexible edgebanding, giving you a substantial edge profile that can match thicker doors or worktops. The flexible construction helps the band follow normal casework edges, which supports consistent adhesion along straight runs. Supplied in a 300 FT length, this product covers long production runs or multiple jobs with a single part number, reducing changeovers during fabrication. As a PVC material, this edge banding creates a durable, work-ready edge surface that stands up to typical shop handling during cutting, drilling, and assembly.
The SAP description 1-5/16X3MM FLEX CP20856 LAC 300FT defines the size and form of this edge banding, so installers know exactly how it will sit on typical sheet goods. A 1-5/16 inch width gives room to cover the panel edge with some margin for trimming, which supports flush, chip-free final edges. The 3mm thickness produces a solid, substantial edge that pairs well with thicker cabinet doors, counters, and commercial fixtures where a more robust edge is desired. Because this is described as FLEX PVC edgebanding, it is intended to be used as a flexible strip, allowing straightforward feeding through standard edgebanding equipment set up for 3mm material.
This product is categorized by Wurth Baer Supply as Edgebanding in the Miscellaneous|Edgebanding category, placing it squarely in panel-edge finishing work for the woodworking industry. The 1-5/16 inch width suits many cabinet sides, shelves, and vertical panels where the edge needs full coverage with some trim allowance. At 3mm thickness, it is well suited to projects that call for a thick edge detail, such as higher-end cabinetry, commercial casework, or fixtures built from composite panels. The 300 FT roll format supports shop environments that run repeated cabinet components, allowing the same Rehau PVC edgebanding 303334-291 to be used across multiple carcasses or job phases without switching materials.
The clearly defined 1-5/16X3MM dimension lets shops dial in edgebander settings for width and thickness once, then run this 303334-291 PVC edge banding repeatedly with predictable trimming results. FLEX in the SAP description indicates a flexible strip, which aligns with typical automatic or manual edgebanding processes that rely on the band conforming smoothly to panel edges. The 300FT length ties directly into workflow efficiency, as a longer roll means fewer stops to change material, keeping feed pressure, heat, and trimming adjustments stable over more parts. Being a Rehau, Inc. PVC edge banding, the product identity and manufacturer part number 303334-291 give purchasing and production a single reference point, simplifying reorders and ensuring the same edge profile is available for future replacement panels or job additions.
Rehau PVC edgebanding 303334-291 is described as 1-5/16X3MM, providing a 1-5/16 inch wide, 3mm thick edge strip that supports full panel coverage and a substantial edge profile.
The 3mm thickness builds a thicker edge line, which pairs well with heavier doors and tops, giving cabinets and fixtures a more substantial, finished perimeter.
FLEX in the 1-5/16X3MM FLEX description identifies this as flexible PVC edgebanding, helping it track along normal panel edges during edgebanding operations.
The SAP description specifies 300FT, giving shops a 300 foot roll length that supports extended runs before a material change is required.
As an Edgebanding product in the woodworking-focused range at Wurth Baer Supply, it suits cabinet, fixture, and general panel-edge finishing work using sheet goods.
The 1-5/16 inch width covers typical panel thickness with extra margin, giving edgebanders material to trim back to a clean, flush edge.
Choose Rehau PVC edgebanding 303334-291 when a 1-5/16 inch wide, 3mm thick flexible PVC edge banding is needed for cabinet or panel work. The 1-5/16X3MM FLEX CP20856 LAC 300FT specification defines a consistent size and 300FT length that integrates smoothly into shop workflows. With a clear manufacturer part number and category placement as Edgebanding from Wurth Baer Supply, this product supports repeatable ordering and consistent edge appearance across current and future woodworking projects.
Sold In: 1 Roll