Rehau PVC edgebanding identified as manufacturer part 303334-303 defines this product as a PVC edge banding solution, which gives cabinet and furniture panels a finished edge that stands up to regular shop and jobsite use. The 1-5/16 inch width stated in the SAP description 1-5/16X3MM FLEX CP20838 EMB LAC 300FT matches common panel thickness needs, so installers can cover edges in a single pass without extra trimming for most builds that align with this dimension. The 3mm thickness in the same description provides a substantial edge profile, which helps create a solid-looking front on doors, drawer fronts, or casework where a more robust visual edge is desired. The FLEX wording in the description indicates a flexible PVC construction, which allows the banding to follow standard straight cabinet edges while supporting typical handling during edgebanding operations. The 300FT length in the SAP description means one continuous roll for longer runs, which reduces splice points during repeated edge work on a project.
The SAP description 1-5/16X3MM FLEX CP20838 EMB LAC 300FT specifies a 1-5/16 inch by 3mm PVC edgebanding, which aligns with common panel edge dimensions so installers can set up straight runs without excessive width reduction or edge alignment rework. The FLEX term in that same description points to a flexible material format, which fits typical manual or automated feed processes where the banding needs to track evenly along the panel edge. The 300FT length noted in the description defines the roll format, so a single roll can cover multiple cabinets or casework sections in sequence, supporting consistent edges across a job.
The Product Class recorded as Edge Banding and the Category listing as Edgebanding identify this Rehau, Inc. product as trim for raw panel edges, so it is suited to cabinet, furniture, and general woodworking projects using sheet goods. The 1-5/16 inch width in the SAP description 1-5/16X3MM FLEX CP20838 EMB LAC 300FT matches edge coverage needs for panels near that thickness, allowing shop teams to apply it along door and case edges where a flush front is desired. The 3mm thickness described in the same line provides a heavier edge, which supports use on fronts that benefit from a more substantial look, such as commercial casework or higher-use cabinetry. Because the Brand is listed as Rehau, Inc., the edgebanding fits into workflows that already rely on Rehau PVC materials in their panel programs.
The SAP description 1-5/16X3MM FLEX CP20838 EMB LAC 300FT documents both width and thickness, giving installers clear dimensions for machine setup so feed and trim stations can be dialed to the 3mm edge profile. The FLEX wording in that description signals a flexible PVC construction, which helps the banding feed smoothly through typical edgebanders, reducing handling interruptions during long straight runs. The 300FT length in the same description defines a long roll format, which supports consistent appearance from the first door edge to the last panel on a run by keeping material from the same lot in continuous use. The Manufacturer Part # 303334-303 and Product Name Rehau PVC Edgebanding, 303334-303 tie the material to a specific reference, so shops can repeat orders and keep edge appearance aligned across future projects.
Rehau 303334-303 is PVC edgebanding classified under Edge Banding and Edgebanding, so it is used to cover and finish exposed edges on panel-based cabinets and furniture.
The SAP description 1-5/16X3MM FLEX CP20838 EMB LAC 300FT states a width of 1-5/16 inch and a thickness of 3mm, allowing setup for that specific edge profile.
The SAP description lists 300FT, so the edgebanding is supplied as a 300-foot roll, supporting multiple cabinets or casework sections in one run.
The Product Name labels it as Rehau PVC Edgebanding, indicating a PVC construction suited to standard woodworking edge treatments.
The 3mm thickness in the SAP description provides a heavier edge, giving doors and case fronts a more substantial visual edge profile during installation.
The Brand field lists Rehau, Inc., so this PVC edgebanding comes from Rehau for shops standardizing on that manufacturer.
The Product Name Rehau PVC Edgebanding, 303334-303 and Manufacturer Part # 303334-303 specify a traceable PVC edge banding, allowing woodworking shops to match future orders to established projects. The SAP description 1-5/16X3MM FLEX CP20838 EMB LAC 300FT defines its 1-5/16 inch by 3mm size and 300FT length, so installers can plan edge runs around known dimensions and roll capacity. For projects built around PVC edge treatment, this Rehau edgebanding gives a clearly defined option aligned with common cabinet and furniture panel work.
Sold In: 1 Roll