Rehau PVC edgebanding identified by manufacturer part 303334-307 gives you a defined PVC edge treatment that finishes raw panel edges so cut boards present a consistent, usable edge in the shop or on the job. The 1-5/16 inch width stated as 1-5/16X3MM allows coverage over standard panel thickness with margin, so you can trim back to a crisp line after bonding. The 3mm thickness in the same description provides a solid PVC edge profile, so the banding creates a substantial edge rather than a thin tape. The FLEX notation in 1-5/16X3MM FLEX CP21124 LAC 300FT identifies this as a flexible style, so the material can follow normal panel runs while still handling effectively during straight-line edgebanding work. The 300FT length in the SAP description supplies a continuous run, so longer projects can be processed with fewer coil changes during fabrication.
The 1-5/16X3MM dimension in the SAP description defines a 1-5/16 inch wide, 3mm thick PVC strip, so you can align this Rehau PVC edgebanding with panel edges that benefit from extra width for trimming passes. That sizing lets fabricators run the banding slightly proud of the surface, then machine or hand-trim back to a clean edge that ties into adjacent faces. The 3mm thickness also yields a noticeable PVC edge profile, so routed corners and returns maintain material for shaping. Because the product class is Edge Banding and the category lists Edgebanding, the piece is intended specifically for edge treatment, so it fits naturally into panel-processing workflows where raw board edges need a dedicated finishing material.
The Category entry of Miscellaneous|Edgebanding and Product Class of Edge Banding define this item as an edge treatment component, so it slots into woodworking operations that finish exposed panel edges on shop-built work. With 1-5/16X3MM stated in the SAP description, the banding provides enough width to overhang common panel thicknesses, so operators can run it across panel edges and still have material available for trimming and flushing. The PVC designation in the product name signals a PVC construction, so the banding is suited to environments where a PVC edge is specified on drawings or material lists. The FLEX indicator in 1-5/16X3MM FLEX CP21124 LAC 300FT shows that this is a flexible style, so it works well in straight runs where a coil-fed or hand-fed band can conform along the edge during processing.
The Manufacturer Part # 303334-307 ties directly to the SAP description 1-5/16X3MM FLEX CP21124 LAC 300FT, so shops can document this Rehau edge banding on job files and return to the same material when repeating a design. That traceable ID supports consistent edges from project to project, because the same width and thickness combination will be pulled each time. The 300FT length supports extended edging sessions, so operators can run multiple panels in sequence without frequent material changes interrupting the setup. The 3mm thickness stated in the size description provides an edge with enough PVC mass to respond well to trimming tooling, so flush-trim passes and light profiling can be performed while keeping the edge profile intact. Since the product name lists Rehau PVC Edgebanding and the Brand line confirms Rehau, Inc., the material aligns with specifications that call out Rehau edge banding, supporting straightforward matching to documented requirements.
Rehau 303334-307 is PVC edge banding listed under Product Class Edge Banding, so it is used to cover and finish exposed edges on panels in woodworking projects.
The SAP description 1-5/16X3MM FLEX CP21124 LAC 300FT specifies a 1-5/16 inch wide, 3mm thick strip, so it can be run slightly proud and trimmed back for a clean finished edge.
The FLEX term in 1-5/16X3MM FLEX CP21124 indicates a flexible PVC style, so the edgebanding feeds smoothly along straight panel edges during typical edging operations.
The 300FT length in the SAP description provides a long continuous run, so multiple panels can be edged in succession with fewer material changeovers during production.
The 3mm thickness in the 1-5/16X3MM description creates a substantial PVC edge, so trimming and light profiling operations maintain a defined, durable edge profile on panels.
The Manufacturer Part # 303334-307 identifies this exact Rehau PVC edgebanding, so shops can record the number on job documents and pull the same material on future runs.
This Rehau PVC edgebanding, detailed as 1-5/16X3MM FLEX CP21124 LAC 300FT with Manufacturer Part # 303334-307, provides a 1-5/16 inch wide, 3mm thick flexible PVC strip, so your next edging run can deliver consistent, documented edges that align with Rehau-based specifications.
Sold In: 1 Roll