Rehau PVC edgebanding 303334-310 provides a PVC edge banding solution identified by manufacturer part number 303334-310, so you can match this specific product when repeating work or aligning with existing shop standards. The SAP description 1-5/16X3MM FLEX CP41533 EMB LAC 300FT defines a 1-5/16 inch wide, 3mm thick flexible PVC edgeband, giving you a substantial edge profile suitable for covering exposed substrate edges that need a thicker edge treatment. The FLEX designation in the SAP description indicates a flexible construction, which supports easier handling around gentle curves and long cabinet runs during installation. The CP41533 EMB LAC detail identifies an embossed, lacquered surface specification, so the edge presents a finished look that coordinates visually across multiple components. The 300FT length noted in the SAP description indicates a continuous supply on a single roll, supporting longer production runs and reducing changeover time.
The SAP description 1-5/16X3MM FLEX CP41533 EMB LAC 300FT supplies both width and thickness, giving installers a clear 1-5/16 inch by 3mm PVC edgebanding profile to match with panel layouts. Because this product is identified as flexible PVC in the SAP description, it responds well to typical edgebanding application techniques used in cabinet shops that work with PVC rather than rigid edges. The embossed, lacquered reference in CP41533 EMB LAC means the working surface of the edgeband is already finished, so trimming and flushing operations can focus on the edges without additional surfacing steps. With a continuous 300FT roll length, feed setups on edge banding equipment can run longer before stopping, supporting smoother throughput on repetitive cabinet or fixture orders.
This product is classified as edge banding under the category Miscellaneous|Edgebanding, so it is suited for covering exposed panel edges in cabinet, furniture, or casework builds that rely on PVC edging. The 1-5/16 inch width listed in the SAP description gives coverage that works well on panels designed around standard sheet goods, leaving enough margin for trimming back to a clean, flush edge. With a 3mm thickness, this Rehau PVC edge creates a defined front edge profile on shelves or door fronts where a more substantial visual edge is part of the design. The FLEX designation shows that the material is flexible PVC, so it supports routing along straight runs and mild curves used in many cabinet and fixture layouts. CP41533 EMB LAC identifies an embossed, lacquered surface, so visible edges on doors, drawer fronts, and case sides present a coordinated finish across a project.
The manufacturer part number 303334-310 ties this specific Rehau PVC edgebanding directly to future reorders, which helps maintain consistent appearance and dimensions across repeat jobs or field replacements. The SAP description 1-5/16X3MM FLEX CP41533 EMB LAC 300FT combines all critical dimensional and material cues in one reference, simplifying takeoffs and shop documentation when specifying edge materials. Because the edgebanding uses flexible PVC as indicated by FLEX, it works smoothly with common edge banding machines set up for PVC tape, which supports predictable trimming and scraping results. The 3mm thickness gives enough material for precise trimming operations, so edges can be flushed to the panel without leaving a thin, fragile lip. The embossed, lacquered CP41533 EMB LAC surface provides a finished face straight from the roll, allowing installers to concentrate on accurate bonding and edge finishing steps rather than additional surface treatment. With a 300FT roll length, shops can plan longer uninterrupted production sequences, helping standardize machine settings and reducing small-batch variation from frequent material changes.
The edgebanding described as 1-5/16X3MM provides a 1-5/16 inch width and 3mm thickness, giving enough coverage and material to trim back to a clean, substantial panel edge.
The FLEX designation in the SAP description identifies flexible PVC material, which follows straight runs and gentle curves more easily, supporting smoother feeding and bonding during edge banding operations.
The CP41533 EMB LAC text specifies an embossed, lacquered surface, so the visible edge presents a finished, textured appearance that coordinates across matching components.
The SAP description lists 300FT, indicating a 300-foot roll length that supports longer production runs with fewer changeovers on edge banding equipment.
The product is identified as PVC edgebanding, so it is made from PVC material suited for cabinet and casework edging processes that standard PVC-compatible equipment handles.
The 3mm thickness gives a robust edge profile, providing enough material for trimming and creating a solid, defined front edge on doors, shelves, and casework panels.
The Rehau PVC edgebanding 303334-310 combines a 1-5/16 inch width, 3mm thickness, and FLEX PVC construction, giving you a defined profile that handles well during edge banding operations. The CP41533 EMB LAC specification delivers an embossed, lacquered finish, so exposed edges on cabinets and casework present a coordinated appearance. With a 300FT roll length recorded in the SAP description, this product supports extended production runs in professional shops or serious DIY setups that value consistent, repeatable edging results across multiple projects.
Sold In: 1 Roll