Rehau PVC edgebanding gives a defined, finished edge to sheet goods by covering exposed core material, which helps cabinets and fixtures present a uniform, professional surface on visible sides. The 1-5/16 inch width matches applications using that overhang, so installers can trim it to the panel edge without leaving gaps, keeping the joint tight and consistent along the run. The 3mm thickness provides a substantial edge profile, which supports machining for flush trimming and light profiling without cutting through, helping maintain a solid-looking edge. This edgebanding is made from PVC, so it forms a continuous plastic edge around the workpiece, which supports everyday woodworking and cabinet shop environments. The CP60213 designation identifies a specific product variant, so shops can repeat the same edge appearance across jobs that call for this reference. The 300 foot length supports longer production runs, reducing changeovers during repetitive edge work.
This PVC edge banding is specified at 1-5/16 inches wide, which suits panels where that width covers the thickness and a small trim allowance, giving installers working room to align and cut flush. The 3mm thickness sets the edge profile depth, so trimmers and routers can be set to remove small overage without exposing the panel core. The material is PVC, so it creates a plastic barrier at the edge that stands between the substrate and routine contact in interior woodworking environments. The 300 foot run length supports edging batches of parts in one setup, which is useful on cabinet or fixture jobs using a consistent edge detail. The Rehau 303334-316 part identification ties these details together for shops standardizing on a repeatable edge solution.
This Rehau PVC edgebanding in a 1-5/16 inch width works on panel builds where that dimension covers the panel edge and allows controlled trimming, keeping the finished line straight along cabinet and furniture sides. The 3mm thickness gives the edge enough body to present a defined profile, so after trimming, the band reads as a solid edge rather than a thin film, which is useful on components that see regular handling. Because the material is PVC, it forms a uniform plastic edge that works well in typical indoor woodworking applications where panels need a consistent, clean perimeter. The CP60213 reference distinguishes this particular variant, which helps shops align on a single edge look when repeating the same design standard across multiple jobs or locations.
The combination of 1-5/16 inch width and 3mm thickness lets installers set up trimmers and edge machines for repeat passes, so each panel can run through with predictable trimming allowance and profile depth, reducing rework from over-cut edges. PVC construction keeps the edge material consistent from coil start to finish, which supports steady feed rates and cutting behavior when processing longer runs of cabinet parts. The 300 foot length on this Rehau 303334-316 coil allows multiple components or full job sets to be edged from the same roll, which helps maintain color and profile continuity from part to part. The defined manufacturer part number 303334-316 provides a clear reference when ordering again, supporting long-term repeatability of the chosen edge detail on follow-up work or matching replacements.
The Rehau PVC edgebanding 303334-316 is specified at 1-5/16 inches wide and 3mm thick, giving installers trimming allowance and a solid edge profile on compatible panel builds.
The CP60213 designation identifies a specific Rehau PVC edgebanding variant, helping shops call out and repeat the same edge detail and appearance across future projects.
The Rehau PVC edgebanding 303334-316 is supplied in a 300 foot length, supporting longer runs of cabinet, furniture, or fixture parts before changing rolls.
The 3mm thickness of this PVC edge banding provides a substantial profile that supports flush trimming and light profiling while maintaining a solid-looking edge on finished components.
This edgebanding uses PVC material, forming a continuous plastic edge around panels that supports typical interior woodworking environments and separates the core from routine contact.
The 1-5/16 inch width provides coverage across the panel edge plus trimming allowance, so installers can align, bond, and trim to a straight, clean finished edge.
The Rehau 303334-316 PVC edgebanding combines a 1-5/16 inch width, 3mm thickness, and CP60213 specification into a defined edge solution that suits panel-based cabinet and fixture builds. By using this 300 foot coil, shops can process repeat runs with the same edge profile and appearance. For workflows built around consistent, clean edges on sheet goods, this PVC edge banding provides a clearly identified option that aligns sizing, material, and length for ongoing production needs.
Sold In: 1 Roll