Rehau PVC edgebanding 303334-320 is a PVC edge banding designed to cover and protect raw panel edges, giving boards a finished working edge that stands up to regular shop use. The 1-5/16 inch width, as indicated in the SAP description 1-5/16X3MM FLEX CP40690 LAC 300FT, lets you cover common panel thicknesses while still trimming back to a precise line, which helps produce straight, professional-looking edges. The 3mm thickness gives the edge banding a substantial profile that can handle machining and everyday contact without feeling flimsy in use. This product is described as FLEX, which indicates a flexible construction that follows slight curves and normal panel tolerances, reducing the risk of cracking along the edge. The 300FT length specified in the SAP description provides a continuous run for multiple cabinet or furniture parts, which supports consistent color and profile from piece to piece on a project.
The SAP description 1-5/16X3MM FLEX CP40690 LAC 300FT defines this product as a 1-5/16 inch wide, 3mm thick PVC edgebanding supplied in a 300FT length, which suits common edgebanding machines or manual application setups that handle continuous rolls. The 1-5/16 inch width provides overhang on standard panel thicknesses so edges can be trimmed cleanly after bonding, supporting tight seams along the face and back. The 3mm thickness works well for edges that must align with adjacent components, providing a consistent edge line once machined. The FLEX designation indicates a flexible PVC profile that follows the panel edge during application, promoting good contact along the full run and supporting efficient installation on repeat parts.
This Rehau PVC edgebanding, identified by manufacturer part number 303334-320 and described as 1-5/16X3MM FLEX CP40690 LAC 300FT, fits projects that use panel construction and need a PVC edge banding solution with a defined width and thickness. The 1-5/16 inch width allows coverage on typical cabinet, furniture, or shelving panels while still leaving room to trim, which supports clean, straight edges along visible faces. The 3mm thickness adds a noticeable edge profile that aligns well with applications where panels meet doors, drawer fronts, or adjacent panels, helping maintain a consistent line across the installation. Because the product is identified as FLEX PVC, it suits situations where panels may have slight variations or long edges, allowing the banding to stay in contact as it is applied. The 300FT length supports runs across multiple components in a single job, which is helpful when one project requires many identical or related parts.
The combination of 1-5/16 inch width and 3mm thickness in the 1-5/16X3MM FLEX CP40690 LAC 300FT description gives installers predictable stock to work with, which supports repeatable setups on edgebanders or trimming stations. Having a consistent 3mm PVC profile along all edges helps maintain uniform reveals and transitions where panels meet hardware or other components, which is important for aligning adjacent pieces over multiple units. The FLEX designation indicates a flexible PVC composition that tracks the edge as it is applied, helping reduce edge lift along longer runs and supporting steady workflow on shop lines. The 300FT continuous length lets installers process multiple cabinet boxes, shelves, or panels from the same roll, which keeps color and edge profile consistent from part to part and simplifies organization when a project calls for the same Rehau 303334-320 edgebanding across many components.
Rehau PVC edgebanding 303334-320 is described as 1-5/16X3MM in the SAP description, meaning it is 1-5/16 inch wide and 3mm thick, which defines the coverage and edge profile during installation.
Rehau PVC edgebanding 303334-320 is identified as FLEX, indicating a flexible PVC construction that follows the panel edge, which supports consistent contact along straight runs during application.
The SAP description specifies 300FT, so this Rehau PVC edgebanding roll provides 300 feet of continuous material, supporting multiple parts or units within the same project.
Rehau PVC edgebanding 303334-320 is classified as edge banding in the edgebanding category, designed to finish and protect the edges of panels in woodworking applications.
The 3mm thickness of this PVC edgebanding creates a solid edge profile that can align with adjacent components and withstand normal handling, which supports a consistent finished look on panels.
The 300FT length allows Rehau PVC edgebanding 303334-320 to cover many panels from a single roll, helping maintain uniform appearance across cabinets or furniture pieces in the same project.
Rehau PVC edgebanding 303334-320, identified as 1-5/16X3MM FLEX CP40690 LAC 300FT, offers a defined 1-5/16 inch width, 3mm thickness, and 300FT length, giving shops a consistent PVC edge banding format for panel-based work. The FLEX PVC construction supports steady application along typical panel edges, while the edge banding category classification confirms its role in finishing and protecting panel edges. For projects that specify Rehau part number 303334-320 or call for this size and format, selecting this edge banding supports consistent results across cabinets, shelving, or furniture panels.
Sold In: 1 Roll