Rehau PVC edgebanding 303334-336 provides a PVC edge banding solution for finishing raw panel edges on cabinetry and casework. The 1-5/16 inch width covers standard panel thickness plus overhang, giving room to trim flush for a straight finished edge. The 3mm thickness builds a substantial front edge, adding a solid feel along doors, drawer fronts, and shelves. This flex PVC edgebanding with CP60438 designation is formulated to bend around typical cabinet contours, helping it follow gentle curves without cracking. The Rehau brand backing supports consistent quality across long runs, which matters when edging multiple cabinets on the same project. A 300 ft length on the roll supports production or multi-job use, reducing changeovers during runs. The edge banding construction is designed as a practical solution for woodworking and cabinet applications where exposed edges need a finished, uniform PVC face.
The 1-5/16 inch width of this Rehau PVC edge banding is sized so common cabinet panels can be covered with a slight margin, allowing trimmers to remove excess for a straight finished edge. The 3mm thickness works with typical edge-banding machinery and manual trimming methods used in woodworking shops. The flexible PVC construction helps the banding seat against the substrate along both straight runs and gentle curves, supporting good contact for adhesive systems chosen by the shop. The 300 ft coil format lets installers set up a continuous run on edgebanders, limiting splices that could interrupt workflow. The Rehau, Inc. designation and manufacturer part number 303334-336 give fabricators a repeatable reference for reorders, maintaining continuity across future repair or expansion work.
This Rehau PVC edgebanding is positioned for woodworking and cabinet applications where raw edges of panels and components need a durable PVC face. The 1-5/16 inch width suits edging on cabinet sides, shelving, and fronts that align with standard sheet goods. The 3mm profile is often used on doors and drawers where a thicker edge detail is desired, giving parts a more substantial front edge. The flex construction means the banding can follow typical casework contours such as ends and light radius transitions found in custom shops. The CP60438 designation within the SAP description ties the banding to a specific appearance and material behavior, so shops can match existing installations that already use this code. With 300 ft on the roll, the product supports both one-off custom builds and repetitive cabinet production, allowing many parts to be run from a single lot.
The 3mm thickness on this edge banding supports precise trimming and flushing operations because there is enough material to cut cleanly without thinning the visible edge excessively. The 1-5/16 inch width gives fabricators extra coverage on both faces of the panel, which helps when parts vary slightly from nominal thickness during machining. The flexible PVC material construction aids in maintaining continuous pressure along the glue line, which supports bond quality when used with common shop processes. The manufacturer part number 303334-336 and the Rehau branding let operations standardize this specific edge banding across job files, reducing variation when replacements or additional cabinets are produced later. The 300 ft coil length reduces the number of coil changes on edgebanding machines, which can help maintain alignment and feed settings across long runs of doors, drawer fronts, and carcass parts.
This Rehau PVC edgebanding is 1-5/16 inch wide and 3mm thick, so it covers the panel edge with extra margin that can be trimmed back to produce a straight, flush finished edge.
The flex PVC construction lets the edgebanding follow gentle curves and standard cabinet geometry, helping it sit tight along the substrate during application and trimming operations.
The CP60438 designation identifies a specific Rehau formulation and appearance, supporting consistent look and behavior when this same edge banding is used across multiple cabinet projects.
The 3mm thickness provides a substantial edge profile that matches many cabinet designs, and it gives enough material for clean trimming and flushing during fabrication work.
The 300 ft roll length supports long or repeated runs of parts from a single coil, helping maintain consistent appearance and reducing time spent changing coils during production.
The 303334-336 part number identifies this exact Rehau PVC edgebanding, giving shops a clear reference for reorders and for matching previous installations that used the same product.
This Rehau PVC edge banding, identified as 303334-336, combines a 1-5/16 inch width, 3mm thickness, and flexible CP60438 construction to support cabinet and woodworking edge finishing. The 300 ft roll length fits both shop production and project-based work. For jobs that call for a consistent PVC edge profile from the same manufacturer part, this Rehau, Inc. edgebanding from Wurth Baer Supply offers a defined size, thickness, and flex design ready to integrate into cabinet and casework workflows.
Sold In: 1 Roll