Rehau PVC edgebanding 303334-500 is an edge banding designed to finish exposed edges on panels, helping create a defined transition where substrate would otherwise show. The material is PVC, so the banding provides a consistent synthetic surface that matches its run along the edge. The SAP description 1-5/16X3MM FLEX CP40073 LAC 300FT identifies this as a 1-5/16 inch wide strip, which gives coverage for thicker panels where a wider face is needed. The 3mm thickness builds a solid edge profile, supporting an edge that can be machined or trimmed to meet your layout. The FLEX designation indicates a flexible band, helping it follow straight or gently curved edges during installation. The CP40073 LAC designation defines a specific finish or pattern within the Rehau system, so runs using that code can maintain visual continuity. The 300FT detail marks this as a continuous length suited to longer production runs.
The SAP description 1-5/16X3MM FLEX CP40073 LAC 300FT provides the working dimensions, so installers know they are working with 1-5/16 inch width and 3mm thickness for planning edge coverage. The 3mm thickness offers material depth for trimming and flush work at the panel surface. The 1-5/16 inch width covers taller edges where narrower banding would leave margins exposed. The FLEX designation shows the band is intended to be workable along the edge, supporting consistent seating during application. The 300FT detail designates a long continuous length, which supports multiple components or repeated runs without frequent material changes.
This product is specified as Rehau PVC edgebanding in the edge banding product class, so it is oriented to panel and cabinetry work where raw board edges need a finished face. The 1-5/16 inch width from the 1-5/16X3MM FLEX CP40073 LAC 300FT description suits applications using thicker panels or where a slightly proud edge is trimmed back, supporting coverage on case sides, shelves, and similar parts. Its 3mm thickness positions it for projects where a more pronounced edge is acceptable, creating a defined edge band that aligns with contemporary panel construction. Because the SAP description identifies a 300FT length, it serves well in shop or site workflows that involve runs of multiple doors, drawer fronts, or carcass parts from the same material code, helping maintain uniform appearance over larger jobs without switching rolls.
The 3mm thickness identified in the SAP description gives the edgebanding enough body for trimming operations, supporting a clean transition when flush-trimmed to the panel surface. The 1-5/16 inch width allows some tolerance in alignment during application, since there is material available to trim to the exact panel height. The FLEX designation in 1-5/16X3MM FLEX CP40073 LAC 300FT indicates a flexible strip, which supports seating along edges without fighting the material, especially on longer parts. The CP40073 LAC code and manufacturer part number 303334-500 define a specific Rehau finish, supporting repeatable matching when the same code is used across multiple components or when replacing parts later. The 300FT length further supports continuity, since long runs can be pulled from a single roll, helping panels within a project share the same edgebanding lot identification.
Rehau 303334-500 is PVC edgebanding in the edge banding product class, so it is used to finish exposed panel edges in cabinetry or other panel-based construction.
The SAP description 1-5/16X3MM FLEX CP40073 LAC 300FT indicates a width of 1-5/16 inch and a thickness of 3mm, providing coverage for thicker panel edges.
The SAP description specifies 300FT, so this edgebanding provides a 300-foot continuous length suited to multiple parts or longer production runs.
FLEX in the description identifies this as a flexible PVC edgebanding, supporting use along straight edges and gentle curves during application.
CP40073 LAC is part of the SAP description and identifies a specific Rehau finish or pattern, helping maintain consistent appearance when that code is used across parts.
The manufacturer part number 303334-500 uniquely identifies this Rehau PVC edgebanding, supporting accurate reordering and matching to existing work using the same code.
The Rehau PVC edgebanding 303334-500 combines a 1-5/16 inch width, 3mm thickness, and FLEX format, as detailed in the 1-5/16X3MM FLEX CP40073 LAC 300FT SAP description, to address panel edge finishing where a substantial, workable strip is needed. The 300FT length supports shop and jobsite runs using a single code, while the CP40073 LAC designation and manufacturer part number 303334-500 provide a clear reference for projects that require consistent Rehau finish identification. For panel edges that call for PVC edge banding in this size and format, this product aligns dimensions, material, and coding into one defined option.
Sold In: 1 Roll