Rehau PVC edgebanding identified as 303334-513 is PVC edge banding from Rehau, Inc. that covers raw panel edges so the substrate is concealed and jobs present a finished perimeter. The 1-5/16 inch width spans typical panel thicknesses plus overhang, giving room to trim edges flush after application. The 3mm thickness provides a substantial edge profile, which helps panels feel solid at the edge and supports machining such as trimming and light profiling. The FLEX designation in the SAP description signals a flexible construction, allowing the edgeband to follow straight runs and gentle curves without fighting the material during application. The CP40121 reference in the description identifies a specific program or finish series, keeping installed runs visually consistent across a project where that same identifier is used. Supplied in a 300ft length, the continuous roll format supports longer runs with fewer changeovers during production work.
The 1-5/16 inch width specified for this Rehau PVC edgebanding gives working excess beyond the panel face, so trimmers can remove a small margin rather than trying to hit the exact panel thickness during bonding. The 3mm thickness supports a defined edge radius after trimming, which helps maintain a consistent look where panels meet doors or adjacent parts. The FLEX designation in the description indicates a formable strip, so it can be guided along straight carcass edges or modest contours without undue spring-back while applying pressure. With a 300ft roll length, shops can set up for repeated passes on matching components, reducing downtime between pieces when edging cabinet runs or furniture panels under a steady workflow.
This Rehau PVC edgebanding, classified as Edge Banding and listed under the Edgebanding category, is intended for covering exposed edges on wood-based or similar panels in woodworking-related projects. The 1-5/16 inch width lets it span the edge and slightly overlap each face, so it suits panel-based builds such as casework, shelving, or similar assemblies where a clean, PVC-wrapped edge is needed. The 3mm thickness supports a pronounced edge profile, so parts can be trimmed and lightly profiled without losing the visible band. Because the product class is Edge Banding and the material is PVC, it is aimed at situations where a synthetic edge is preferred around workpieces supplied by distributors such as Wurth Baer Supply to the woodworking industry.
The combination of 1-5/16 inch width and 3mm thickness described in the SAP record gives installers working tolerance, which helps reduce rework when trimming flush to panel faces. The FLEX wording in the description indicates that the Rehau PVC edgebanding can adapt to panel edges during application rather than resisting bends, which supports steadier movement through manual or automated equipment. The 300ft length in the SAP description keeps more material on a single roll, which helps maintain consistent tension and feed characteristics over multiple parts in the same setup. Identifying the band by the Rehau 303334-513 manufacturer part number ties finished work to a repeatable specification, so future orders of the same identifier can maintain visual continuity on add-on or matching jobs.
Rehau PVC edgebanding 303334-513 has a width of 1-5/16 inch, giving enough coverage to overlap panel faces and be trimmed flush for a clean, straight finished edge.
Rehau PVC edgebanding 303334-513 is specified at 3mm thickness, creating a substantial edge profile that supports trimming and light profiling while keeping a strong visual band.
The FLEX wording in the SAP description indicates a flexible edgeband construction, helping the strip follow cabinet or furniture edges with less resistance during application.
Rehau PVC edgebanding 303334-513 is described with a 300FT length, supporting extended edging runs on multiple parts before a roll change is needed.
Rehau 303334-513 edgebanding is identified in the product name as PVC, providing a synthetic edge surface that keeps a consistent appearance along panel edges.
This product is identified by the manufacturer part number 303334-513 and the SAP description 1-5/16X3MM FLEX CP40121 LAC 300FT, helping match the same band on future jobs.
Rehau PVC edgebanding 303334-513 combines a 1-5/16 inch width, 3mm thickness, and FLEX construction in a 300ft roll, giving shops a defined, repeatable edge solution. Adding this specified band to panel work supports consistent sizing and appearance across current and follow-up projects.
Sold In: 1 Roll