Rehau PVC edgebanding is a PVC edge banding solution from Rehau, Inc. that finishes raw panel edges, so cabinet and furniture projects gain a defined edge instead of exposed core. The product is identified as Rehau PVC Edgebanding, 303334-518, tying it directly to the manufacturer part number for consistent reordering across jobs and shops. As an Edge Banding product in the edgebanding category, it is intended for treating panel edges rather than broad surfaces, which helps direct it to the right step in a woodworking workflow. The SAP description 1-5/16X3MM FLEX CP20242 LAC 300FT defines the basic dimensions and format, allowing planning around thickness, width, flexibility, and run length.
The 1-5/16X3MM dimension in the SAP description defines the core size of this Rehau PVC edgebanding, which helps set up trimming and flushing operations around a known thickness and width. As an Edge Banding product categorized under miscellaneous edgebanding, it is oriented toward edge treatment tasks rather than structural use, guiding where it should be applied in a build sequence. The FLEX notation in the SAP description identifies this as a flexible style of PVC edgebanding, which supports typical shop handling on edgebanding equipment designed for roll-fed material. The 300FT reference in the SAP description defines an extended run length, which supports uninterrupted processing of multiple parts in a production environment.
This product is described as Rehau PVC Edgebanding, 303334-518, positioning it as a branded edge banding solution from Rehau, Inc. for woodworking environments that use panel construction. Being in the Edge Banding class within the edgebanding category, it is suited to finishing exposed edges on cabinet components, furniture parts, and other panel-based assemblies rather than covering large faces. The PVC designation in the product name identifies it as a plastic edgebanding material, aligning it with panel substrates that are commonly edged with synthetic banding in shops supplied by Wurth Baer Supply. The SAP description phrase 1-5/16X3MM FLEX CP20242 LAC 300FT places this item among flexible edgebanding formats that are typically run from a roll, fitting standard edge-processing sequences that rely on continuous material.
The 1-5/16 inch width and 3mm thickness in the SAP description define a consistent cross-section, which supports predictable trimming, scraping, and flush-routing steps when dialing in edge profiles across a production run. The FLEX reference in the SAP description characterizes the banding as flexible, which supports feeding behavior that operators expect from roll-style PVC edge banding on appropriate machinery. The 300FT run length in the SAP description offers a defined linear quantity, helping project planners estimate coverage across multiple cabinets or casework components from a single item number. The manufacturer part number 303334-518 ties directly to this configuration, which supports accurate reordering and helps keep edge treatments consistent from job to job. The CP20242 and LAC identifiers in the SAP description further distinguish this specific variant, which supports alignment with internal shop standards or drawings that call out those codes.
Rehau PVC edgebanding 303334-518 is identified as PVC edge banding, so it provides a plastic edge treatment suited to typical panel-based woodworking projects that rely on synthetic edging.
Rehau PVC edgebanding 303334-518 is described as 1-5/16X3MM, giving it a 1-5/16 inch width and 3mm thickness, which supports consistent edge coverage and machining setups.
Rehau PVC edgebanding 303334-518 is listed with 300FT in the SAP description, providing 300 feet of material for extended cabinet or furniture edge runs.
Rehau PVC edgebanding 303334-518 uses FLEX in its description, indicating a flexible format that supports handling and feeding like typical roll-style PVC edgebanding.
This Rehau PVC edgebanding is identified by manufacturer part number 303334-518 and SAP description 1-5/16X3MM FLEX CP20242 LAC 300FT, supporting consistent reordering.
Rehau PVC edgebanding 303334-518 is an Edge Banding product in the edgebanding category, aligning it with panel-edge finishing on cabinet and furniture components.
Rehau PVC edgebanding 303334-518 combines PVC material, a 1-5/16 inch by 3mm cross-section, and a 300-foot FLEX format, so it supports panel-edge finishing workflows that demand consistent dimensions and extended runs. The clearly defined SAP description 1-5/16X3MM FLEX CP20242 LAC 300FT and manufacturer part number 303334-518 help align purchasing with shop standards. For cabinet, furniture, or other panel-based projects that rely on PVC edge treatment, this Edge Banding product from Rehau, Inc., available through Wurth Baer Supply, offers a defined configuration that fits organized, repeatable work.
Sold In: 1 Roll