Rehau PVC edgebanding 303334-525 is a PVC edge banding from Rehau, Inc. that covers and finishes exposed panel edges, so cabinet and furniture projects present a consistent, manufactured look instead of raw core material. The 1-5/16 inch width stated in the SAP description provides coverage for panel thicknesses in that range, allowing installers to trim back to a flush edge. The 3mm thickness described in the SAP text offers a substantial edge profile that stands up to everyday contact on doors, drawer fronts, and casework sides. The product class of edge banding defines its role as the finishing strip in panel construction, letting you match panel faces and protect edges in one pass. The 300ft length described in the SAP text supports longer runs and repeat work before changing rolls.
The 1-5/16 inch width in the SAP description gives room to center the Rehau PVC edgebanding, bond, and then trim both sides, which supports straight, parallel edges on case parts. The 3mm thickness called out in the SAP text creates enough material for clean radius trimming on corners, so edges present a smooth transition instead of a sharp break. The 300ft length described in the SAP information keeps the same product on the machine longer, which supports consistent setup of feed speed, heat, and trimming tools for the duration of a run. The designation FLEX in the SAP description identifies this as a flexible format, helping the strip conform around standard cabinet and furniture parts in typical shop workflows.
The category listing of Edgebanding and the product class Edge Banding define Rehau PVC edgebanding 303334-525 as a finishing strip for panel edges in woodworking applications. The 1-5/16 inch width from the SAP description aligns with edge treatment on cabinet sides, shelves, and doors made from sheet goods in that thickness range. The 3mm thickness specified in the SAP text supports use on exposed edges where a more substantial banded look is preferred, such as cabinet fronts and high-visibility furniture components. The 300ft length described in the SAP description enables shop production of multiple cabinets or casework runs from a single roll, which supports consistent appearance across a project. The Rehau, Inc. branding identifies the manufacturer, giving installers a defined source when matching existing work that used the same manufacturer part number 303334-525.
The SAP designation 1-5/16X3MM FLEX CP40230 LAC 300FT ties width, thickness, flexibility, formulation code, and roll length to one specific Rehau PVC edgebanding, so setup choices can be repeated from job to job. The 1-5/16 inch width described in this text allows a consistent overhang on each side of the panel before trimming, which helps maintain uniform trim settings across multiple parts. The 3mm thickness noted in the SAP description offers enough material for standard edge trimming tools to work without tearing, helping maintain clean, straight edges along the full length. The FLEX wording in the SAP text indicates a flexible construction, supporting smooth feeding around slight variations in panel alignment during installation. The 300ft length in the description keeps long runs on a single roll, reducing changeovers that could interrupt settings on edgebanding equipment and supporting stable throughput in the shop.
Rehau PVC edgebanding 303334-525 is listed in the SAP description as 1-5/16 inch wide, which provides coverage for panels in that thickness range with enough overhang for flush trimming.
The SAP description specifies a 3mm thickness, giving a substantial edge profile that supports clean trimming and a defined appearance on exposed cabinet and furniture edges.
The SAP text lists the roll length as 300ft, which supports longer production runs and multiple components being edged from the same roll for visual consistency.
Rehau PVC edgebanding 303334-525 is identified as PVC edgebanding, so it is a PVC-based edge banding suited to typical woodworking edgebanding equipment and processes.
The SAP description notes FLEX, identifying a flexible format that helps the strip follow standard panel edges smoothly during application and trimming operations.
The SAP description lists CP40230 LAC as part of the identity, marking a specific Rehau formulation and profile so installers can match prior work by that designation.
Rehau PVC edgebanding 303334-525 combines a 1-5/16 inch width, 3mm thickness, FLEX construction, and 300ft roll length, as described in the SAP text, to support steady cabinet and furniture edge work. Using this defined Rehau, Inc. manufacturer part number 303334-525 aligns panel edging, trimming, and visual results to a consistent, repeatable specification on shop and jobsite projects.
Sold In: 1 Roll