Rehau PVC edgebanding 303334-539 is a PVC edge banding from Rehau, Inc. that covers exposed panel edges so cabinet and furniture projects present a finished look and protect the core material in everyday use. The 1-5/16 inch width matches panels in that edge size range, allowing installers to cover the full thickness in a single pass. The 3mm thickness adds a substantial edge profile that stands up to typical shop handling while giving a solid, defined edge line. The FLEX designation identifies a flexible material that works around straight runs and gentle contours, helping maintain a consistent appearance on varied cabinet parts. This edgebanding is supplied in a 300ft length, supporting longer runs and multiple jobs from a single roll to cut downtime between projects. The CP60077 LAC reference provides a precise finish and program code so shops can reorder the exact same look.
This Rehau PVC edgebanding uses a 1-5/16 inch width, giving installers enough material to center on the edge and then trim back to a flush surface without exposing the core. The 3mm thickness works well where a more substantial edge is desired, such as cabinet fronts or higher-traffic furniture edges, supporting a consistent visual line after trimming. The FLEX material characteristic helps the banding conform to typical cabinet profiles and gentle curves during application, supporting even pressure along the glue line. With 300ft on a roll, production teams can run multiple cabinet boxes, shelves, or fronts using a single continuous coil, aiding color and finish consistency across parts and simplifying coil management at the edgebander or during manual application.
Rehau PVC edgebanding 303334-539 serves woodworking and cabinet projects that rely on PVC edge banding for finishing panel edges. The 1-5/16 inch width pairs with panels using that edge thickness, so cabinet sides, shelves, and similar components can be covered in one pass. At 3mm thick, this edgebanding suits exposed edges on fronts or high-contact areas where a more substantial PVC edge is preferred. The FLEX PVC construction supports use on straight cabinet sides and modestly contoured elements, keeping the edge appearance uniform from panel to panel. The CP60077 LAC designation ties the banding to a specific finish program, which is important for shops repeating existing jobs that already rely on this material and appearance. In settings where jobs call for consistent PVC edging across many parts, the 300ft roll length supports that requirement.
The 1-5/16 inch by 3mm format of this Rehau PVC edge banding helps installers hit the same visual result across multiple setups, because the dimensions stay constant job after job. That fixed thickness means machines or hand tools can be dialed to a repeatable trim cut without chasing varying edge sizes. The FLEX characteristic of the PVC helps the strip lie down smoothly along standard cabinet edges, limiting tension points that could disrupt the bond line and visual alignment. The 300ft coil length supports uninterrupted runs on an edgebander, reducing splices and transitions that might otherwise introduce color breaks or alignment shifts. With the manufacturer part number 303334-539 and CP60077 LAC designation clearly defined, shops can specify the same edgebanding each time a project is re-run, so edge thickness, width, and finish remain consistent across future replacements or additions. These details work together to support predictable processing and appearance in production environments.
Rehau PVC edgebanding 303334-539 has a 1-5/16 inch width and 3mm thickness, so it covers that edge thickness range in one pass and provides a substantial PVC edge profile.
Rehau PVC edgebanding 303334-539 is a PVC edge banding, which gives a durable plastic edge surface that protects panel cores in typical cabinet and furniture environments.
Rehau PVC edgebanding 303334-539 carries a FLEX designation, indicating a flexible construction that follows straight runs and gentle curves on cabinet components.
Rehau PVC edgebanding 303334-539 is supplied in a 300ft length, supporting longer production runs and multiple projects from a single coil of material.
Rehau PVC edgebanding 303334-539 uses the CP60077 LAC designation to identify a specific finish and program, helping shops repeat the same appearance on future jobs.
The 3mm thickness on Rehau PVC edgebanding 303334-539 creates a more substantial edge that resists normal impact and gives cabinet fronts a defined, solid-looking profile.
Rehau PVC edgebanding 303334-539 brings together a 1-5/16 inch width, 3mm thickness, FLEX construction, and a 300ft length to support efficient cabinet and furniture edge finishing. The defined CP60077 LAC program and clear manufacturer part number help shops repeat color, finish, and dimensions across new builds and follow-up work. For woodworking teams needing PVC edge banding that aligns with these specifications, this Rehau option keeps edge appearance and processing steps consistent from one project to the next.
Sold In: 1 Roll