Rehau PVC edgebanding 303334-547 is a PVC edge banding from Rehau, Inc. that finishes exposed board edges so panels present a defined, uniform edge in shop and on-site work. The 1-5/16 inch width from the SAP description 1-5/16X3MM FLEX CP40095 LAC 300FT covers typical panel thicknesses in woodworking projects, giving you enough edge coverage to trim back cleanly. The 3mm thickness in the same description provides a substantial edge profile that stands out clearly against the panel face during machining and flushing operations. The FLEX notation in the SAP description indicates a flexible PVC construction that follows panel edges during application, helping the band sit tight along straight runs and gentle transitions. The CP40095 LAC reference in the SAP description identifies this specific finish configuration so you can repeat the same look across multiple jobs over time. The 300FT length in the SAP description supports extended production runs with fewer material changeovers.
The SAP description 1-5/16X3MM FLEX CP40095 LAC 300FT defines the installation format, giving installers clear expectations for how this Rehau PVC edge banding will handle during layout and application. The 1-5/16 inch width gives some margin beyond common panel thicknesses, which supports edge overhang for later trimming without exposing the core material. The 3mm thickness yields a more substantial band than thinner tapes, which matters when setting trimmers and flush bits to avoid cutting into the panel face. The FLEX designation points to a flexible PVC format that conforms along panel edges during application, supporting steady pressure along the length. The 300FT length means fewer roll changes once a run is started, helping maintain rhythm on repetitive cabinet or component edges.
The category Miscellaneous|Edgebanding locates this Rehau PVC edge banding 303334-547 squarely within general edgebanding tasks in woodworking environments, so it can serve on a variety of panel-based projects where a PVC edge is specified. The product class Edge Banding defines its function as treating exposed edges on boards or panels, which fits cabinet components, shelving parts, or other cut-to-size elements needing a finished edge. The 1-5/16 inch width from the SAP description suits work with panel thicknesses that fall within that coverage, allowing installers to center the band on the edge and trim both faces back. Because the same SAP description confirms a 3mm thickness, shops can align this banding with projects that call out a 3mm PVC edge profile on drawings or cut sheets.
The FLEX notation in the SAP description signals a flexible PVC format, which is useful when running continuous edges along straight or gently changing paths on standard panel work. The CP40095 LAC portion of the SAP description identifies a defined configuration within Rehau offerings, which matters for matching edge appearance on repeat orders or across multiple phases of a project using this same part number. By tying the manufacturer part number 303334-547 to this configuration, purchasing and production can reference one identifier from estimating through cutting and edging, reducing the chance of mixing different bands in the same run.
The manufacturer part number 303334-547 keeps this Rehau PVC edgebanding linked to a single specification, so once a shop dials in machine settings for the 3mm thickness, they can reuse those settings whenever this part number is scheduled. The 3mm thickness from the SAP description provides a distinct step between the band and the panel during trimming setup, which helps operators feel and see the cut as they flush the edge. The 1-5/16 inch width in the SAP description creates predictable overhang on common panel thicknesses, enabling consistent trimming passes along both faces without chasing a narrow edge.
The FLEX designation in 1-5/16X3MM FLEX CP40095 LAC 300FT indicates a flexible PVC body that lies along the edge as it is applied, which supports even contact across the length for better adhesion with appropriate equipment. The 300FT length noted in the SAP description groups a significant amount of material under one part number, helping production leads schedule long edging sequences without frequent roll changes. The association with Rehau, Inc. as the brand means this edge banding can be organized with other Rehau parts in inventory systems, simplifying retrieval when a project specifies this exact Rehau PVC Edgebanding, 303334-547.
Rehau PVC edgebanding 303334-547 has a SAP description of 1-5/16X3MM, giving it a 1-5/16 inch width and 3mm thickness for edge coverage and a substantial edge profile.
The FLEX term in the SAP description 1-5/16X3MM FLEX CP40095 LAC 300FT indicates a flexible PVC format, helping the edgeband follow panel edges during application.
The SAP description lists 300FT, indicating this Rehau PVC edgebanding 303334-547 provides 300 feet of material for extended edging runs.
The CP40095 LAC segment in the SAP description identifies a specific configuration of this PVC edgebanding, supporting consistent selection for repeat projects.
This item is listed under the product class Edge Banding and category Miscellaneous|Edgebanding, defining it as an edge treatment component for panel work.
The Rehau PVC edgebanding, 303334-547, is associated with Rehau, Inc., aligning it with Rehau branded components in shop inventories.
The SAP description 1-5/16X3MM FLEX CP40095 LAC 300FT and manufacturer part number 303334-547 together define a specific Rehau PVC edge banding that fits panel edge finishing tasks. The 1-5/16 inch width and 3mm thickness support trimming workflows focused on a noticeable edge profile. The FLEX notation describes a flexible PVC form suited to following panel edges, while the 300FT length suits production sequences using one consistent band. Choosing this Rehau PVC Edgebanding, 303334-547 through Wurth Baer Supply connects your edge treatments to a clearly identified, repeatable part across planning and fabrication.
Sold In: 1 Roll