Rehau PVC edgebanding 303334-562 is a PVC edge banding designed to finish exposed panel edges on cabinets, fixtures, and other woodworking projects. The 1-5/16 inch width from the 1-5/16X3MM FLEX CP40569 LAC 300FT description covers common panel thicknesses, so one profile can serve multiple build situations. The 3mm thickness called out in the same description provides a substantial edge profile, giving panels a solid, finished feel at impact zones such as cabinet fronts or work surfaces. The FLEX detail in the product description indicates a flexible PVC construction, which helps the tape follow slight panel variations and maintain a consistent line along the edge. The 300FT length in the description supports longer production runs or multiple installations from a single roll, which reduces changeover time between pieces.
The 1-5/16 inch width from the 1-5/16X3MM FLEX CP40569 LAC 300FT description gives enough overhang on standard panel thicknesses, helping trimming equipment produce a clean, flush edge after bonding. The 3mm thickness in the same description establishes a robust edge layer, which works well where panels may see repeated contact, such as cabinet doors and drawer fronts. The flexible PVC nature indicated by FLEX supports consistent pressure along the glue line when running through an edgebander or during manual application, promoting even adhesion. Because this product is defined as PVC edge banding within the Edge Banding product class, it integrates naturally into workflows built around PVC-compatible edging tools and adhesives.
This product is described as Rehau PVC edgebanding, 303334-562, in the Edge Banding category, positioning it for cabinet, fixture, and general woodworking edge finishing. The 1-5/16 inch width mentioned in the SAP description gives coverage suited to standard panel constructions used in casework and furniture builds. With a 3mm thickness called out in that same description, the banding creates a pronounced edge profile that pairs well with higher-wear faces and visible fronts on cabinetry. The FLEX note in 1-5/16X3MM FLEX CP40569 LAC 300FT supports use on straight runs and slight variations, since flexible PVC helps maintain a steady edge line. The CP40569 designation provides a specific reference that shops can match to design schedules or sample boards carrying that identifier.
The defined 1-5/16X3MM size in the SAP description provides predictable stock dimensions, allowing operators to set trimming and scraping tools for consistent flush results from piece to piece. The 300FT length mentioned in the same description increases the amount of continuous material available, which helps maintain color and profile consistency across runs without frequent roll changes. Because the product is identified as PVC edge banding by Rehau, Inc., it aligns with processes tuned for PVC materials, supporting reliable machining characteristics at common feed speeds. Being categorized by Wurth Baer Supply as Edge Banding within Miscellaneous|Edgebanding means it is intended as a dedicated edging solution in the broader woodworking workflow. Together, these defined attributes support repeatable edges on cabinets, casework, and similar assemblies.
The Rehau PVC edgebanding 303334-562 is described as 1-5/16X3MM in the SAP description, giving you a 1-5/16 inch wide, 3mm thick edge profile suited to common panel builds.
The 303334-562 edge banding is identified as Rehau PVC edgebanding, meaning it uses PVC material that works with processes and tooling designed around PVC edging.
The 1-5/16X3MM FLEX CP40569 LAC 300FT description specifies a 300FT length, providing extended footage from one roll for longer or multi-cabinet production runs.
The FLEX wording in the 1-5/16X3MM FLEX CP40569 LAC 300FT description points to flexible PVC construction, helping the banding follow normal panel variations during application.
The 3mm thickness in the SAP description creates a more substantial edge, which suits cabinet fronts and similar areas where edges see frequent contact in daily use.
The CP40569 designation in the SAP description ties this edgebanding to a specific Rehau reference, helping shops align it with drawings or finish schedules that call out CP40569.
The Rehau PVC edgebanding 303334-562 combines a defined 1-5/16X3MM size, flexible PVC construction, and a 300FT length to support cabinet and woodworking edge finishing. The CP40569 designation and Edge Banding classification help it slot into jobs that specify Rehau edging. For projects needing a consistent PVC edge profile from a known Rehau, Inc. reference, this 1-5/16X3MM FLEX CP40569 LAC 300FT product from Wurth Baer Supply offers a clearly identified option for your next run.
Sold In: 1 Roll