Rehau PVC edgebanding, 303334-572, is a PVC edge banding from Rehau, Inc. that covers and finishes raw panel edges so cabinet and furniture parts present a uniform, workable edge. The product class as edge banding means it is intended to be applied along exposed board edges rather than broad surfaces, letting installers turn cut sheet goods into finished components. The SAP description "1-5/16X3MM FLEX CP40416 LAC 300FT" identifies this edgebanding as 1-5/16 inch wide and 3mm thick, which suits applications where a heavier edge profile and added impact surface are desired. The "FLEX" designation signals a flexible construction that follows typical straight runs and moderate curves, helping parts track through common edgebanding workflows. The 300ft description indicates a continuous length that supports multiple cabinet parts in one run, reducing changeovers between jobs.
The SAP description "1-5/16X3MM" defines the working dimensions, so panels with edges up to this width can be covered with some overhang for final trimming, reducing visible substrate at the finished edge. As a 3mm PVC edge banding, the product presents enough material thickness for standard trimming tools to track without digging into the panel face during installation. The flexible designation in the description indicates the strip is suited to typical straight and mildly contoured edges that run through standard edge banders. With the product classified as edge banding, tradespeople can align it with the edge of suitable sheet goods and process it following their established edgebanding workflow.
Rehau PVC edgebanding, 303334-572, is categorized as edgebanding in the Wurth Baer Supply assortment, positioning it for woodworking tasks where exposed board edges require a finished PVC face. The SAP description identifies it as part number CP40416 LAC, which distinguishes this specific finish and configuration within Rehau, Inc.'s edge banding offerings for repeat selection on similar jobs. With a width of 1-5/16 inch, the strip suits edges on panels that need a bit of extra coverage beyond nominal board thickness, giving room for machining or slight panel variances. The 3mm thickness supports applications where a more robust edge profile is beneficial, such as cabinet components or furniture edges that will interact with doors, fronts, or adjacent parts.
The PVC composition, confirmed in the product name as PVC edgebanding, provides a uniform synthetic material that responds predictably to typical edgebanding cutters and trimmers, supporting consistent edge quality from part to part. The "FLEX" wording in the SAP description indicates the strip is designed to bend along standard panel edges, which helps maintain continuous contact along the glue line during normal application. With a length stated as 300ft, a single coil can service multiple related pieces, aiding color and surface continuity across a set of cabinets or casework built from the same lot. Identifying the product by manufacturer part number 303334-572 allows shops to reorder the exact same edge banding when matching past installations, supporting visual alignment across replacements or extensions.
Rehau 303334-572 is a Rehau PVC edgebanding classified as edge banding, so it is used to cover and finish exposed panel edges in woodworking projects.
The edgebanding has a width of 1-5/16 inch and a thickness of 3mm, giving extra coverage for trimming while providing a substantial edge profile.
The FLEX wording in the SAP description indicates a flexible strip that follows typical panel edges during application, supporting smooth movement through standard edgebanding processes.
The 300ft length description signals a continuous coil that can edge multiple cabinet or furniture parts, helping maintain consistent material across a project run.
This product is identified by manufacturer part number 303334-572 and SAP description 1-5/16X3MM FLEX CP40416 LAC 300FT, allowing precise repeat ordering.
The PVC construction, stated in the product name, offers a consistent synthetic edge that works predictably with standard routing and trimming tools used on edge banding.
Rehau PVC edgebanding, 303334-572, from Rehau, Inc. combines a 1-5/16 inch width, 3mm thickness, and FLEX behavior in a 300ft PVC edge banding coil identified as CP40416 LAC. These verified details support continuous edge finishing on cabinet, furniture, or general woodworking components handled through common edgebanding workflows. For projects calling for a defined 3mm PVC edge profile with reorderable part identification, this edge banding aligns panel edges with the specified Rehau configuration.
Sold In: 1 Roll