Rehau PVC edgebanding 303334-577 is a PVC edge banding from Rehau, Inc. designed as a finishing strip for exposed panel edges, so cabinet and furniture projects present a uniform, protected edge instead of a raw substrate. The product is identified as PVC edgebanding in the Edgebanding product class, which positions it as a trim component in woodworking builds where panel durability and appearance both matter. The SAP description 1-5/16X3MM FLEX CP20565 LAC 300FT indicates a 1-5/16 inch wide, 3mm thick, flexible PVC profile, giving installers a substantial edge thickness that can visually match thicker fronts and absorb minor handling. The 300FT designation indicates a long continuous length that supports running multiple cabinets or casework sections from a single roll for consistent color and edge dimension across the shop job.
The SAP description 1-5/16X3MM FLEX CP20565 LAC 300FT confirms a 1-5/16 inch by 3mm PVC edgebanding format, giving installers a clear sense of how this banding seats on panel edges sized for that width. Because the width is defined, panel layouts and saw settings can be planned so that trimming operations remove only slight overhang, keeping edges square while preserving full coverage. The 3mm thickness called out in the same description sets expectations for the resulting edge reveal, which influences router bit or trimmer setup when flushing and profiling. The flexible designation in the description supports handling along standard straight cabinet edges, helping maintain alignment as the material is applied along long runs.
The product is described as Rehau PVC Edgebanding, 303334-577 in the Edgebanding category, so it is suited to applications where exposed edges on panels need a PVC edge treatment. The SAP description 1-5/16X3MM FLEX CP20565 LAC 300FT positions it as a 1-5/16 inch wide, 3mm thick flexible strip, aligning it with panel constructions designed to accept that width and thickness on cabinet, furniture, or fixture edges. In woodworking shops, this sizing allows the edgebanding to cover the face of typical engineered panels dimensioned for a 1-5/16 inch band, supporting builds where door and carcass edges are meant to carry a thicker, more substantial PVC edge. The 300FT roll length supports running series of doors or carcasses in one project, helping maintain consistent edge dimensions and color across related components.
The SAP description highlighting 1-5/16X3MM FLEX CP20565 LAC 300FT defines a specific 1-5/16 inch by 3mm PVC edgebanding size, which sets the working envelope for trimming and finishing. The 1-5/16 inch width offers enough coverage to seat securely on panel edges laid out for that width while still leaving a manageable margin for trimming, which is helpful for controlled cleanup with edge trimmers. The 3mm thickness specified in the description yields a thicker band than ultra-thin veneers, giving a more robust edge that can visually align with heavier fronts or commercial-style cabinetry. Because the product is identified as flexible in the same description, installers can feed it along typical straight cabinet and furniture edges with steady tension, supporting repeatable, uniform results across multiple panels using the same setup.
The Rehau PVC Edgebanding, 303334-577, is described as 1-5/16X3MM in the SAP description, providing a 1-5/16 inch wide, 3mm thick edge that defines trim and tooling expectations on panel projects.
The 3mm thickness called out in the SAP description creates a relatively thick PVC edge, which produces a more substantial visual profile and supports edge durability in everyday cabinet or furniture use.
The FLEX notation in the SAP description indicates a flexible PVC edgebanding construction, helping the strip handle and track along standard straight panel edges during application in the shop.
The SAP description lists 300FT, indicating a 300-foot length that supports edging multiple cabinets, doors, or panels in a run while maintaining consistent edge dimensions and appearance.
The Rehau 303334-577 is listed in the Edgebanding product class and Edgebanding category, defining it as a PVC edge banding component for finishing exposed panel edges.
The 303334-577 PVC edgebanding is a product from Rehau, Inc., giving shops a clearly branded edge banding option associated with the manufacturer part number 303334-577.
The Rehau PVC Edgebanding, 303334-577, combines a 1-5/16 inch width, 3mm thickness, and flexible PVC format as specified in the SAP description 1-5/16X3MM FLEX CP20565 LAC 300FT, giving a clearly defined edge profile for panel builds. With its 300FT length and precise manufacturer part number identification, this edge banding suits production or repeat work where a consistent, known PVC edge is required. For cabinet, furniture, or fixture projects designed around a 1-5/16 inch by 3mm PVC edge, this Rehau edgebanding offers a matched size and format that supports straightforward layout, trimming, and repeat ordering.
Sold In: 1 Roll