Rehau PVC edgebanding 303334-579 is a PVC edge banding designed to finish exposed panel edges, so raw substrate is covered and workpieces present a uniform appearance across the job. The 1-5/16 inch width allows this edgebanding to cover typical panel thicknesses with enough margin for trimming, which helps installers flush-trim reliably without risking a short reveal. The 3mm thickness gives the banding a substantial edge profile, so corners feel solid in everyday use and stand out visually on cabinets and casework. The FLEX designation in the SAP description indicates a flexible construction, which allows the edgebanding to conform to straight panel runs and gentle contours often found in woodworking projects. The CP40223 reference identifies a specific finish or program within the Rehau line, so multiple components on a project can share the same coordinated appearance from one source.
The 1-5/16 inch width of this Rehau PVC edgebanding gives installers extra material past common panel faces, which supports reliable trimming with handheld or machine tools on cabinet and furniture parts. The 3mm thickness specified in the SAP description creates a defined edge profile that responds well to common trimming and scraping steps, so the finished surface blends cleanly with adjacent laminates or coatings. The FLEX designation supports handling during application, as the banding can follow straight or gently contoured edges without fighting the material, which aids in maintaining tight contact along the glue line. The 300FT length stated in the SAP description lets shops set up a run and process many parts in sequence, helping maintain consistent edge quality across a full project.
This Rehau, Inc. PVC edgebanding belongs to the Edgebanding product class, so it is suited for finishing exposed edges on panels used in cabinets, furniture, and general woodworking assemblies. The 1-5/16 inch width from the SAP description fits work on panels where an overhang is preferred, enabling installers to align the banding by eye or with guides before trimming to final size. The 3mm thickness supports projects that call for a thicker, more pronounced edge rather than a thin tape, which works well on doors, drawer fronts, and visible carcass edges. The FLEX characteristic in the SAP description means the banding can adapt to typical shop layouts where panels may include modest curves or transitions, allowing one material to serve multiple edge conditions on the same job.
The 300FT roll length indicated in the SAP description supports both small-batch and extended runs, so shops can edge many cabinet components without frequent changeovers or material splices. The CP40223 reference within the SAP description ties this edgebanding to a defined Rehau program, making it useful when coordinating edges with other elements specified under the same reference on plans or cut lists. Because the material is PVC as stated in the product name, edges present a unified synthetic surface that aligns with standard panel products used in many woodworking environments, which helps maintain a consistent look from face to edge on finished assemblies.
The 1-5/16 inch width and 3mm thickness called out in the SAP description create a repeatable setup window for trimming equipment, so once an installer dials in cutters or scrapers, similar parts can be processed with uniform results. The FLEX detail in the SAP description supports consistent adhesion along straight or gently curved edges, because the material can follow the substrate without concentrating stress at transitions, which helps maintain a tight bond over time. The 300FT roll format reduces the number of material changes during a job, so color and profile remain consistent from the first component to the last in a production run.
The manufacturer part number 303334-579 directly identifies this specific Rehau PVC edgebanding, which simplifies reordering when additional material is required for repeat projects or field adjustments. The CP40223 reference within the SAP description signals a defined appearance within the Rehau system, so different fabricators using the same reference can produce edges that coordinate visually across installations. The classification under Miscellaneous|Edgebanding confirms its intended role as edge banding within the woodworking workflow, so it integrates naturally into established processes for cutting, bonding, and trimming panel components.
Rehau PVC edgebanding 303334-579 has a width of 1-5/16 inch as stated in the SAP description, giving extra material for reliable trimming on typical panel thicknesses.
This Rehau PVC edge banding is 3mm thick according to the SAP description, creating a substantial edge profile suitable for visible cabinet and furniture components.
The SAP description notes FLEX for this PVC edgeband, indicating a flexible construction that allows the material to follow straight runs and gentle contours on panel edges.
The SAP description specifies a 300FT length, so one roll can edge many components in a continuous run during shop or onsite work.
The CP40223 reference in the SAP description identifies a specific Rehau program or finish family, helping align this edgebanding with other matching components on a project.
This Rehau PVC edgebanding, classified as Edgebanding, suits finishing exposed panel edges in cabinets, furniture, and similar woodworking assemblies that benefit from a thicker 3mm edge.
This Rehau, Inc. PVC edgebanding 303334-579 pairs a 1-5/16 inch width with 3mm thickness, giving woodworking shops a flexible, substantial edge profile for cabinets and casework. The FLEX construction and 300FT roll length support efficient runs where consistent appearance and repeatable trimming matter on every project.
Sold In: 1 Roll