Rehau PVC edgebanding 303334-595 is a Rehau, Inc. edge banding designed to finish exposed panel edges in woodworking and cabinet projects. The 1-5/16 inch width from the 1-5/16X3MM size helps cover standard panel thicknesses while giving enough material for precise trimming and flushing. The 3mm thickness stated in the SAP description supports a substantial edge profile that can be machined without feeling flimsy during processing. The FLEX designation in the SAP description identifies this as a flexible PVC material, which allows the banding to follow gentle curves and handle routine handling on the bench. The CP20580 reference in the SAP description defines a specific color or finish code within the Rehau system so installers can match this banding across multiple components. The 300FT length stated in the SAP description provides a long, continuous run that reduces changeovers on repetitive cabinet or casework jobs.
The 1-5/16X3MM format in the SAP description specifies a strip sized for practical edge coverage and machining. The 1-5/16 inch width gives working room for alignment on the substrate before trimming, so the finished edge can be flushed accurately with routers or edge trimmers. The 3mm thickness provides a solid edge profile that machines cleanly and supports a defined edge radius during finishing operations. The flexible PVC described by FLEX allows the band to be pressed into contact along straight runs and gentle contours without fighting stiffness, which supports steady pressure during bonding and reduces handling time on the bench. The 300FT length documented in the SAP description means fewer roll changes in a shift, which can keep setups stable from one cabinet or case side to the next.
The Category entry of Miscellaneous|Edgebanding and the Product Class of Edge Banding identify this item as edge treatment for panel-based construction, aligning it with cabinet, furniture, and casework applications. The 1-5/16 inch width from the SAP description fits work where panels have exposed edges that need full coverage and a little overhang, such as cabinet sides, shelves, and doors. Because the material is described as FLEX PVC, it supports runs on straight panel edges and modest curves typically found on contemporary cabinetry, so fabricators can carry one material across matching components. The Rehau brand designation ties this edgebanding to a manufacturer focused on these applications, which supports consistent performance when fabricators stay within the same product family across a project.
The 3mm thickness identified in the SAP description creates a substantial working edge that resists damage during trimming and sanding passes, which helps maintain clean lines from one component to the next. The 1-5/16 inch width gives extra material beyond the panel edge, allowing installers to align the banding quickly and then trim back to a tight, uniform edge, reducing visual variation between doors or shelves. The flexible PVC noted by FLEX helps the edgebanding conform to any minor irregularities along the edge, supporting continuous adhesion and limiting gaps that can show under light. The CP20580 designation in the SAP description provides a precise Rehau reference, so when the same code is used on multiple runs, the visible edges are positioned to match throughout the installation. The 300FT roll length supports uninterrupted production on a series of cabinets or casework parts, which keeps joints and seams along the edge to a minimum.
Rehau PVC Edgebanding, 303334-595 uses the 1-5/16X3MM size from the SAP description, indicating a 1-5/16 inch wide, 3mm thick strip for edge coverage and trimming.
Rehau PVC Edgebanding, 303334-595 is described as FLEX in the SAP description, meaning a flexible PVC that follows straight runs and gentle curves during edge application.
Rehau PVC Edgebanding, 303334-595 carries the CP20580 reference in the SAP description, designating a specific Rehau code to align color or finish matching across components.
Rehau PVC Edgebanding, 303334-595 uses a 300FT length as stated in the SAP description, providing long, continuous runs suitable for multiple cabinets or casework pieces.
Rehau PVC Edgebanding, 303334-595 is in the Miscellaneous|Edgebanding category and Edge Banding product class, aligning it with panel edge finishing in cabinetry and woodworking projects.
Rehau PVC Edgebanding, 303334-595 uses manufacturer part number 303334-595 to identify this specific size and CP20580-coded PVC edge banding from Rehau, Inc.
Rehau PVC Edgebanding, 303334-595 combines a 1-5/16X3MM size, FLEX PVC construction, CP20580 reference, and 300FT length as documented in the SAP description, giving cabinet and woodworking shops a defined, repeatable edge solution for panel projects. The Category listing of Miscellaneous|Edgebanding and Product Class of Edge Banding position this as a focused option for finishing exposed edges on casework and cabinetry. For runs where consistent appearance and sizing matter across multiple parts, this Rehau, Inc. edgebanding provides a clearly specified material that aligns with professional shop workflows.
Sold In: 1 Roll