Rehau PVC edgebanding, 303334-639, is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cabinets, fixtures, or casework present a uniform, protected edge instead of raw board. The SAP description 1-5/16X3MM FLX CP40621 LAC 300FT identifies this as a 1-5/16 inch wide, 3mm thick flexible strip, giving you a substantial edge profile that matches heavy-use panel applications. The PVC material allows the banding to conform along straight runs while maintaining a consistent profile, supporting a neat visual line across doors, drawer fronts, or carcass edges. The 300FT notation indicates a continuous length suited to production or larger projects, reducing changeovers between runs and helping maintain color and profile consistency across multiple parts.
The 1-5/16 inch width on this Rehau PVC edgebanding, 303334-639, gives coverage beyond common board thicknesses, which lets fabricators center the banding, bond it, then trim back both faces for a flush finish. The 3mm thickness builds a solid front edge, which supports machining of slight profiles or easing edges while still keeping material at the face. The flexible PVC designation helps the banding lie flat along straight edges when fed through suitable edgebanding equipment, supporting consistent bond lines and even reveal from part to part. The 300FT length supports feeding through automated or manual setups with fewer coil changes, which helps maintain workflow continuity in production or large custom runs.
This Rehau PVC edgebanding, 303334-639, sits in the Edge Banding product class, so it is intended for finishing exposed edges on panels in cabinet, furniture, or fixture assemblies. The 1-5/16 inch width allows use on typical carcass sides, shelving, and door or drawer fronts where the edge needs both coverage and trimming allowance. With a 3mm thickness, the banding supports applications where edges see frequent contact, such as kitchen, bath, or commercial casework fronts, because the thicker profile forms a more substantial barrier than thin tape-style options. The flexible PVC description supports use along standard straight substrates used in panel processing, fitting into workflows that rely on edge-banding machines or guided hand application for linear runs.
The combination of 1-5/16 inch width and 3mm thickness on this Rehau PVC edge banding, 303334-639, helps installers create repeatable, flush edges because the extra width gives trimming room while the thicker face resists minor handling during routing or scraping. The flexible PVC noted in the SAP description supports reliable seating against the substrate during bonding, which reduces the chance of voids or uneven contact along straight runs. The defined part number 303334-639 ties directly to this specific size and construction, which allows shops to standardize processes and settings around one profile and then reorder the same product for future work. The 300FT length supports setting up equipment once for a run of parts, helping production maintain consistent feed conditions and reducing downtime between jobs that share this same edge banding specification.
Rehau 303334-639 is a PVC edge banding in the Edge Banding product class, so it is used to finish exposed panel edges in cabinet, furniture, or fixture construction.
This Rehau PVC edgebanding is described as 1-5/16X3MM, so it provides 1-5/16 inch width, giving coverage and trimming allowance over typical panel thicknesses.
The 3mm thickness on this PVC edge banding creates a substantial front edge, supporting impact resistance and allowing light profiling or easing while maintaining material at the face.
The flexible PVC construction helps the banding conform along straight panel edges during bonding, supporting consistent contact and a smooth, even edge profile in normal panel-processing workflows.
The 300FT length allows long or repeated runs from a single coil, supporting production jobs by reducing coil changes and helping maintain visual consistency across many parts.
The part number 303334-639 uniquely identifies this size and type of Rehau PVC edgebanding, so shops can reorder the same product to match existing projects or standardize materials.
This Rehau PVC edgebanding, 303334-639, combines 1-5/16 inch width, 3mm thickness, and flexible PVC construction in a 300FT length, giving shops a clearly defined edge-banding option for panel work that needs a substantial, uniform finished edge. Selecting this specific Rehau part through Wurth Baer Supply aligns sizing, material, and format with production-focused cabinet, furniture, or fixture projects where repeatable edge appearance matters.
Sold In: 1 Roll