Rehau PVC edgebanding 303334-641 provides a PVC edge banding solution for finishing exposed panel edges in woodworking projects. The 1-5/16 inch width covers common panel thicknesses, so raw edges on boards or casework can be concealed in a single pass. The 3mm thickness adds a substantial PVC edge, giving panels a defined edge profile that stands up to regular handling. The CP20761 lacquer finish on the edgebanding introduces a finished surface layer, so the edge can visually coordinate with the specified lacquered look on surrounding components. The flexible PVC construction allows the strip to follow straight runs and gentle contours, supporting continuous application along cabinet, furniture, or fixture edges. Supplied in a 300 ft length, this edgebanding supports longer production runs or multiple projects from the same part number, helping shops keep edge details consistent wherever this profile is specified.
This Rehau PVC edge banding uses a 1-5/16 inch width, giving installers coverage that reaches across the panel edge and slightly beyond for trimming, which helps achieve tight, flush results after machining. The 3mm material thickness provides enough PVC for edge tools to cut and flush-trim without leaving a fragile feather edge, which is helpful when working along long cabinet sides or shelves. The CP20761 lacquer finish on the edgebanding establishes the edge surface appearance before installation, allowing the finished look to be built in as the band is applied. The PVC composition pairs with common shop edgebanding equipment, supporting standard trimming and finishing workflows on cabinets, furniture, or casework built around this profile.
The 1-5/16 x 3mm FLX CP20761 LAC 300FT designation describes a PVC edgebanding sized for panel edge treatment in woodworking environments. The 1-5/16 inch width covers the full thickness of typical sheet goods, so carcass sides, tops, bottoms, or shelves can be edged with the same strip. The 3mm thickness gives a substantial edge that reads as a defined band on cabinet fronts and exposed ends. The CP20761 lacquer reference identifies the lacquer-style finish on the PVC surface, aligning the edge appearance with designs that call for a lacquered look. The 300 ft roll length supports cabinet shops, fixture manufacturers, or woodworking operations that repeat this edge detail across multiple units while working from a single Rehau 303334-641 part.
The defined 1-5/16 inch width lets fabricators standardize setups around this Rehau PVC edge banding, supporting repeatable trimming and flush-edge results from panel to panel. The 3mm PVC thickness gives machines and hand tools enough material to work with, helping maintain a clean line after trimming rather than a thin, fragile edge. The CP20761 lacquer finish on the banding sets the edge color and sheen at the material stage, so the finished edge look is tied directly to the part number instead of post-process steps. The PVC construction provides uniform behavior along the entire 300 ft roll, which supports steady feeding, consistent adhesion behavior, and a matching profile anywhere the band is applied under the same production conditions.
Rehau PVC edgebanding 303334-641 is specified at 1-5/16 inch width and 3mm thickness, giving installers a wide, substantial PVC edge profile for panel work.
The 3mm PVC thickness on this edgebanding provides enough material for trimming tools to create a flush, solid edge profile along cabinets or panels.
The CP20761 lacquer designation identifies a lacquer-style finish on the PVC edgebanding surface, so the visible edge matches that lacquer appearance.
Rehau PVC edgebanding 303334-641 is supplied in a 300 ft length, supporting extended runs or multiple projects using the same edge detail.
Rehau PVC edgebanding 303334-641 suits woodworking projects where panel edges need a 1-5/16 x 3mm PVC band with a CP20761 lacquer appearance.
The 1-5/16 inch width covers the panel edge and provides overhang for trimming, supporting clean, flush results along casework and shelving.
Rehau PVC edgebanding 303334-641 combines a 1-5/16 inch width, 3mm thickness, and CP20761 lacquer finish into a single, repeatable edge solution. For projects built around this dimension and appearance, choosing this 300 ft Rehau PVC edge banding keeps edge details consistent from part to part.
Sold In: 1 Roll