Rehau ABS edgebanding 315428-075 is an ABS edge banding designed as a finishing edge for panels in woodworking and cabinet projects. The SAP description specifies a 15/16 x 1mm size, so it covers common 3/4 inch panel edges while giving a bit of overhang for trimming. The ABS material provides a uniform, machinable edge, which supports smooth trimming and consistent profiles on standard edgebanding equipment. The 1mm thickness gives a substantial edge detail compared to thinner tapes, which helps create a more solid finished look along cabinet sides, shelves, and casework. The description also notes 600ft, so this single roll supports longer production runs or multiple jobs without frequent changeovers. This product sits in the Edgebanding product class, so it is intended to finish raw board edges where a matching or coordinated edge is required.
The SAP description lists this Rehau ABS edgebanding as 15/16 x 1mm ABS, so it is sized to work with typical board thicknesses used in cabinetry while allowing a small margin for trimming. The ABS material described offers a stable edge for machining during application, so it supports consistent trimming and scraping operations on both straight and simple contoured edges. The 1mm thickness in the description provides a solid edge layer that responds well to common edgebander pressure and cutting settings, which helps maintain a clean line along doors, drawer fronts, and case parts.
This product is categorized as Edgebanding and labeled as ABS in the SAP description, so it is intended for finishing exposed edges of panels in woodworking and cabinet construction. The 15/16 inch width means it suits edges of panels around 3/4 inch thick, giving enough excess to trim back to the board for flush results along carcasses, partitions, and tops. With 1mm thickness, it provides an edge that can handle routine handling in cabinet interiors and exteriors while maintaining a visible, defined profile on shelves and gables. The 600ft length described supports use on series production, such as full kitchens or multiple office casework units, where a single roll can service many linear feet of edging without interrupting the workflow.
The manufacturer part number 315428-075 ties directly to this ABS edgebanding specification, which helps shops keep consistency across repeat projects when matching existing edges. Because the SAP description specifies ABS material, installers can run familiar edgebanding machine settings suited to ABS, supporting predictable trimming, corner rounding, and scraping behavior on each pass. The 15/16 inch width and 1mm thickness combination gives room for fine adjustments at the machine while still delivering a sturdy edge, which helps reduce rework from mis-trimmed or under-covered edges on visible case fronts. The 600ft length helps maintain continuous runs on edgebanders, supporting better throughput on larger batch jobs where stopping to change rolls would interrupt setup and alignment.
Rehau ABS edgebanding 315428-075 is listed as 15/16 x 1mm. This sizing suits typical 3/4 inch panel edges while leaving enough material for clean, flush trimming during edgebanding.
Rehau 315428-075 edge banding is described as ABS. This ABS composition provides a consistent synthetic edge that works well with standard edgebanding machinery and trimming tools.
This ABS edgebanding is specified at 1mm thickness. That thickness offers a solid, defined edge profile on cabinet parts while remaining suitable for common edgebander settings.
The SAP description lists a 600ft length. This extended length supports longer production runs or multiple cabinetry projects using the same edge banding.
This 15/16 inch ABS edge banding is categorized as Edgebanding, fitting finishing work on panel edges in woodworking, such as cabinet carcasses, shelving, and similar casework.
The Rehau part number 315428-075 uniquely identifies this specific ABS edgebanding, supporting consistent reorders and alignment with existing installations using the same product.
Rehau ABS edgebanding 315428-075 pairs a 15/16 inch width with a 1mm thickness, so it addresses common panel edge needs in cabinet and woodworking projects. The ABS material and 600ft length support repeatable edgebanding runs where consistent edge appearance and extended linear coverage matter. For shops standardizing on a specific dimensioned ABS edge, the clearly defined 315428-075 identification helps tie day-to-day work to the same dependable specification across multiple jobs.
Sold In: 1 Roll